Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Granada Hills
Gate parts fail. It’s rarely the gate itself. In Granada Hills, the failure almost always starts underground, where a 30-year-old concrete footing from the Northridge rebuild has finally cracked or settled. When a 14-foot swing gate rips its hinge bolts out of a masonry pilaster, the gate didn’t break. The foundation under it did. Gatewood Fence & Gate repairs what other gate companies in Granada Hills replace. We weld on site, in your driveway, so your gate stays put and the fix happens the same day you call. If you’re on the fence about whether the damage is structural or cosmetic, call (818) 514-7606 and talk it through with Hal. He has been doing this since 2001 and will tell you straight what needs welding and what doesn’t.
Why Gatewood Fence & Gate Is Granada Hills’s Preferred Gate Parts & Welding Company
Granada Hills homeowners keep our number pinned because we answer with a live person every time. Not a voicemail, not a queued robot. Hal Gatewood’s name is on the shop and on every invoice, and he has kept a published address and license number anyone can look up since he started in 2001. Around here, people check. That’s fair. We’d check too.
The work itself is repair-first. We don’t haul your gate off to a shop or swap hinges two feet away from the actual problem: a tilting post or a cracked footing. Our Gate Parts & Welding crew welds on site, tunes the operator, and tests the full swing before we leave. And every job, no matter how small, carries our 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround, no fine print. That promise means something on a 14-foot gate in Granada Hills that takes a Santa Ana gust at 50 mph and has to hold.
Our Gate Parts & Welding Services in Granada Hills
Hinge Replacement
A hinge that squeaks or binds in Granada Hills usually means the post behind it has moved. The 1994-1995 wave of quake-era footings is aging out now, and we see the same story on Sesnon Boulevard, in Knollwood, and across Balboa Heights: the pilaster looks straight, but the footing settled three degrees, and that three degrees tears hinge barrels apart. We replace the hinge, yes, but we check the post and footing first. Otherwise you’re fixing the same gate twice.
Post Replacement
Most original gate posts on 1950s-1970s Granada Hills ranch homes were set shallow, no rebar, and never meant to carry a 400-pound steel gate for thirty years. We cut the old post out, re-foot with #5 rebar and poured concrete, and set a new post that will actually hold. If you’re near the Knollwood Country Club area, we will inspect the pilaster interior before quoting. We regularly find hollow-core masonry or corroded rebar behind brick that looks perfect.
Rail Repair
A sagging gate is not always a hinge problem. On wider ranch entrances and side-yard RV gates, the top rail cracks where the load concentrates. We straighten, sleeve, or replace the rail on site, then weld it properly, which means full penetration, not a tack weld hiding under a coat of paint. Shortcuts on a wide Granada Hills gate show up as another call within a year.
Custom Welding
Some gates need a part that was never sold in a catalog. An offset hinge for a pilaster that settled out of square. A reinforcement plate for a gate that flexes in Santa Ana wind. A new latch post for a side gate. We cut, shape, and weld it on site, and we design it to fail predictably and safely when overloaded, rather than snapping at the weakest weld. Hal will show you exactly what he is welding and why.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Granada Hills
We service LiftMaster, DoorKing, and Elite openers regularly in Granada Hills, along with most other major brands. We stock common hinge barrels, roller assemblies, latch kits, and opener parts locally, so a repair doesn’t stall waiting for a part from a warehouse across the country. If your operator is a Mighty Mule on a solar panel at the end of a long driveway, we can assess whether the welding problem is in the gate or in the operator mount, because around here they often fail together. We quote the repair before we start and you agree before any work begins.
Common Gate Parts & Welding Problems We See in Granada Hills Homes
- Quake-era footings settling or cracking. Rebuilt in 1994-1995 after the Northridge earthquake, many concrete footings under gate posts are now failing at the same time. The post tilts, the gate binds, the hinge tears loose. The gate itself often looks fine.
- Santa Ana wind racking wide swing gates. Granada Hills sits in a natural wind corridor, and fall and winter bring gusts that flex long gate spans. Wind doesn’t usually break a healthy gate. It finishes the ones with a cracked weld or a weakened hinge post.
- Masonry pilasters that look solid but aren’t. Around Knollwood Country Club, we find hollow-core or rebar-corroded pilasters that can no longer hold hinge anchor bolts under load. The gate drops, sags, or scrapes the drive, and the cause is hidden behind brick that looks perfect.
- Thermal binding on 100°F+ summer days. Steel gate frames grow measurably in San Fernando Valley heat. A gate that cleared its post by an eighth of an inch in January can rub hard by August, and the operator burns out trying to muscle through the bind.
Pricing for Gate Parts & Welding in Granada Hills, CA
We Also Serve Cities Near Granada Hills
If you’re a few minutes outside Granada Hills, we cover the corridor daily: Granada Hills, San Fernando, Northridge, Sylmar, and Reseda. Same live person on the phone, same written promise, same crew that will look you in the eye.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Granada Hills
Why do gate posts around Knollwood Country Club fail even when the pilaster looks fine?
Because the pilaster’s interior is often hollow-core or the rebar has corroded from decades of water intrusion, so the hinge anchor bolts can no longer hold under load. The brick outside stays intact while the gate pulls the bolts through the inside. This is common enough around Knollwood that we inspect pilaster integrity before quoting hinge repair on those streets. Call (818) 514-7606 if your gate is dropping and you can’t see why.
Do I need a solar gate opener for a long driveway in Granada Hills?
In most cases, yes, if mains power stops more than 100 feet from the gate. Running conduit that distance costs more than a good solar panel and battery setup, and around Granada Hills, where lots are larger than the typical LA yard, solar is frequently the smarter choice. We can assess your driveway length and power access on the first visit.
Can Santa Ana winds permanently warp my wide farm gate?
They can if the gate has a hinge post that is already moving or a top rail with a fatigue crack. A healthy, well-footed gate will flex and return. A gate with a hidden crack will twist under repeated gusts, and once the rail is warped it needs straightening or section replacement, which is usually a welding job, not an operator adjustment.
How do I know if my gate operator failed because of a bad loop detector or a welding problem?
Look at the gate when it’s not moving. If it sags, scrapes, or binds at any point in the swing, the operator has been fighting a mechanical problem, and a new loop detector will not fix it. The loop tells the opener a car is there. It can’t fix a hinge that’s torn loose. We test the gate movement first, then the electronics.
Is it worth repairing a 1990s gate post that’s still standing?
Sometimes yes, if the post itself is sound and only the footing has settled. We can sometimes re-plumb and re-shim without a full re-foot. But if the post is rusted through at the base or the footing is cracked beyond patch repair, replacement is cheaper in the long run than welding brackets on a failing foundation. The test is simple: show me the gate closing on its own and I’ll show you where it’s failing.
Ready to get your gate fixed in Granada Hills? Call (818) 514-7606 for an honest assessment and a written price before any work starts. Hal will answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Granada Hills and the surrounding San Fernando Valley.