Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Tarzana Homeowners
Gate parts fail in Tarzana for specific reasons: the dry heat works on powder coating, the Santa Ana winds stress hinge welds, and the soil here shifts more than people expect. When a gate starts dragging or a hinge tears loose, you need someone who welds on site and carries the parts that actually fit. Hal Gatewood has been fixing gates across Gate Parts & Welding - Tarzana since 2001, and he still shows up to most jobs himself. You’ll get a straight answer about whether a part needs replacing or just repairing. Call (818) 514-7606 and you’ll reach a live person, not a machine.
What Our Gate Parts & Welding Service Includes
We fix the gate in your driveway. That’s the simplest way to say it. Some companies want to haul your gate to a shop or sell you a whole new panel when the problem is one hinge post. Hal’s approach is different: he brings the welder, the steel stock, and the replacement parts to you, and he fixes what’s actually broken. Here’s what that covers.
Hinge Replacement
Hinges carry the entire weight of the gate, and they wear unevenly depending on how the gate is loaded. You’ll notice the gate starting to dip toward the latch side, or a creak that gets worse every week. We cut out the old hinge, weld in a new one that matches the gate’s weight class, and make sure the reveal stays even. If the original hinge was undersized, which we see too often in Tarzana, we’ll tell you and fit one that will actually hold up.
Post Replacement
The hinge post is where a gate lives or dies. A sagging gate is almost never a problem in the panel itself; it’s the post leaning or rusting out at the base. We dig out the old post, set a new one in concrete at the proper depth for our soil, and weld the hinge brackets back on square. You won’t fix a bent post by adjusting the hinges, and we won’t pretend otherwise.
Rail Repair
Gate rails take a beating, especially on long driveways in Tarzana where people back into them from time to time. A bent or cracked rail doesn’t just look bad; it changes how the gate tracks and forces the rollers to work at an angle. We straighten rails when the steel is still sound, and replace sections when it isn’t. It’s part of the repair-first approach: replace what’s failed, not the whole frame.
Custom Welding
Not every gate part exists in a catalog, and repairs on ornamental gates rarely match the original pattern. Hal welds custom brackets, gate stops, pickets, and braces on site, matched to the existing steel and finished so the repair doesn’t scream at you every time you drive in. For homeowners with older estate gates near our Gate Parts & Welding in Encino, custom welding is often the only way to keep the original design intact. We take that seriously.
Gate Rollers
Rollers wear out on a schedule, and the first sign is usually a gate that grinds instead of glides. You might also see flat spots on the wheels themselves or grooves worn into the track. We replace roller assemblies with matched components, not whatever the nearest hardware store sells. For slide gates specifically, we check the entire run of track because one bad roller usually means the others are close behind.
Latch & Lock
A gate that won’t latch isn’t a gate; it’s a liability. Whether you have a simple gravity latch or a keyed lock integrated with your opener, we fix or replace the hardware so the gate closes securely every time. That includes aligning the strike plate, replacing worn springs, and adjusting anything that’s drifted out of tolerance. A secure gate is the whole point of having one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We service nine major gate brands and stock common OEM parts for most of them, but a few names show up more than others in Tarzana. LiftMaster operators are common on newer installation projects, and we’ve replaced enough of their swing arms and brackets to know exactly which parts fit which models without guessing. We keep their most common replacement components on the truck.
DoorKing and Elite gates are everywhere in the Valley, particularly on older estate properties that were built when those brands were the default choice. We still service a lot of Mighty Mule units on residential farm gates and long driveways in the area. Whether you have one of these brands or something else entirely, the process is the same: we identify the part, match it or weld a replacement, and get your gate working without selling you something you don’t need.
Signs You Need Gate Parts & Welding Right Now
- The gate sags toward the latch side even after you adjust the hinges. This almost always means the hinge post is leaning or the hinges themselves are failing at the weld. The longer it drags, the more damage it does to the latch and the panel. A sagging gate is also a gate that will eventually refuse to close at all.
- You hear grinding, scraping, or a hard clunk when the gate moves. That sound is metal on metal where it shouldn’t be. It’s usually a roller or a hinge that’s given up, and running the gate in that condition wears out everything else faster. A quick call today usually means a smaller repair than one next month.
- The gate post moves when you push on it. If the post flexes at the base, the concrete footing has likely failed or the post is rusting below the soil line. You cannot fix this with a turnbuckle or a brace. It needs a new post set properly, and the sooner it’s done, the less the gate gets damaged in the meantime.
- Welds are cracked or rust is bleeding through the paint. Cracked welds are a structural problem that only gets worse under load. Rust bleeding through the finish means moisture is already in the steel. We’ll grind out the bad weld, reweld it properly, and treat the steel so the repair lasts instead of just hiding the problem.
- The gate won’t latch or the lock fights you every time you try to turn it. A gate that won’t stay closed is a gate that isn’t doing its job. Whether the latch is misaligned or the lock internals are worn, this is one of the easiest and cheapest repairs we do. It’s also one of the most important for security.
Our Gate Parts & Welding Process - Step by Step
- 1
You call, and a live person answers. No phone tree, no voicemail, no call center. You’ll describe what’s happening with your gate, and we’ll ask the right questions to figure out whether it’s urgent or something that can wait a few days. If it sounds like an emergency, we’ll tell you honestly whether we can get there today.
- 2
We show up when we say we will, and we look at the whole gate. Hal or one of his crew will examine the gate in place, not just the symptom you called about. That means checking the posts, hinges, rollers, track, and latch. We use straightedges and levels to find the real problem rather than guessing at it.
- 3
You get an upfront price before any work starts. We quote the job in writing before we touch a single bolt. If we find something else that needs attention while we’re working, we stop and tell you about it and get your okay before doing anything extra. The price you agree to is the price you pay. No surprises at the end.
- 4
We do the work on site and clean up when we’re done. Most parts and welding repairs happen right in your driveway. We bring the welder, the steel, the fasteners, and the replacement parts with us. When the job is finished, you’ll see the repair, not the mess.
- 5
You get the 90-Day Done Right Promise in writing. Every job we do is stamped with it. If something isn’t right within 90 days, you call us and we come back and make it right. Hal’s name is on the invoice, and he means it.
How Much Does Gate Parts & Welding Cost in Tarzana?
How much Gate Parts & Welding costs in Tarzana depends on what failed and how much steel work is involved. A basic hinge replacement on a standard residential gate typically runs $180 to $340. Post replacement is bigger work, usually $450 to $1,100 depending on how deep the footing needs to go and whether we have to match ornamental steel. Custom welding runs $95 to $150 per hour plus materials, and most rail repairs fall between $220 and $600. Latch and lock replacement is usually the most affordable fix, in the $95 to $240 range.
What changes the price: the weight of the gate, how much rust or damage is already in the steel, whether we need to match ornamental details, and whether the post footing has to be dug out and repoured. The way to avoid overpaying is simple: get a written estimate from someone who’s actually looked at the gate. Phone quotes are guesses. Our estimates are free, and if you already have a written estimate from another company, we’ll give you a free second opinion on it. You’ll also get $40 off any repair over $200, and there’s no trip charge inside the county.
Gate Parts & Welding Near Tarzana - Our Service Area
We work throughout Tarzana and the surrounding Valley, from Encino and Reseda to Woodland Hills and Calabasas. Most repair calls in Tarzana get a same-day or next-day visit, depending on the time of year and how the schedule looks that week. If you’re in Sherman Oaks, we’ve got a dedicated page for Gate Parts & Welding in Sherman Oaks and we handle those jobs the same way. You can also check our Gate Parts & Welding in Santa Monica page if you’re further west. And if you’re just starting to look into what’s available, our home page walks through everything we do.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Tarzana
Gate parts and welding covers the structural and mechanical repairs that keep a gate functioning: hinges, posts, rails, rollers, latches, and any custom steel work a gate needs. In most cases, it means welding on site rather than removing the gate from the property. Hal Gatewood has been doing this work since 2001 and still does most of the welding himself.
Most hinge, roller, and latch repairs take one to two hours on site. Post replacement and custom welding jobs can take half a day to a full day depending on the digging and the amount of steel work involved. We’ll give you a time estimate before we start so you know what to expect.
A typical repair runs $180 to $600, with post replacement and heavier custom welding running higher depending on the scope. We quote every job in writing before work starts, and the price does not change at the door. Call (818) 514-7606 for a free estimate, and remember we give $40 off any repair over $200.
Yes, we service all three brands regularly in Tarzana, along with FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. We keep common OEM parts in stock for most of these brands and can source anything else quickly. If you’re not sure what brand your gate is, we can usually identify it in the first few minutes of the visit.
We answer the phone 24/7 and will tell you honestly whether we can get to you the same day. If you have a gate that’s stuck open, stuck shut, or leaving your property unsecured, call (818) 514-7606 and we’ll work you in as fast as we can. Tarzana calls often get same-day service depending on the schedule.
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right within 90 days of the repair, call us and we’ll come back and fix it. No runaround, no fine print. Hal Gatewood’s name is on every invoice and he stands behind the work.
You don’t need to do much. Clear space around the gate so we can work safely, and make sure the area is accessible when we arrive. If your gate is automated, it helps to know where the operator controls are located. We’ll handle the rest and leave the area clean when we’re finished.
Schedule Your Gate Parts & Welding Service in Tarzana Today
If your gate is sagging, grinding, or refusing to latch, don’t let it get worse. Call (818) 514-7606 and you’ll reach a live person who can talk through what’s happening and help you figure out the next step. Estimates are free, and there’s no trip charge inside Los Angeles County. Hal’s been fixing gates in Tarzana since 2001, and he’ll give you the same straight answer he’d give a neighbor.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana since 2001.