Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sylmar
Gate parts and welding in Sylmar usually means one of two calls: a wind-damaged gate that won’t close, or a 50-year-old iron gate that’s finally sagging past the point of adjustment. We handle both, and most jobs are done same-day when we’re already in the 91342 area. Hal Gatewood has been fixing gates since 2001, and our shop is set up to weld on site so your gate never leaves your driveway. If your gate is dragging, cracked, or off its track, call (818) 514-7606 and a live person picks up, day or night.
Why Gatewood Fence & Gate Is Sylmar’s Preferred Gate Parts & Welding Company
Sylmar is not like the rest of the Valley. The Newhall Pass funnels Santa Ana wind straight into this community, and we’ve seen what that does to gate hardware over the years. Hinges rip out of posts. Weld seams crack along the frame. Heavy ranch slide gates jump their tracks entirely. A company that only does gate work in Burbank or Studio City doesn’t understand why a 14-foot equestrian gate off Foothill Boulevard fails the way it does. We do, because we’re here regularly.
Every job we do in Sylmar carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround. We’re licensed and insured, background-checked, and Hal’s name is on the invoice. Customers around San Fernando Road and Hubbard Street know they can drive to the shop and look him in the eye if they ever need to. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Sylmar
Hinge Replacement
On most 1970s Sylmar swing gates, the failure starts at the hinge post, not in the middle of the panel. Wind loads broadside the gate, the hinge pins elongate their holes, and the whole frame starts leaning. We cut out the old hinge, weld in a reinforced plate if the post is still sound, and hang the gate straight. If the post itself is cracked or rotted, we address that too, before it fails again next Santa Ana season.
Post Replacement
Sylmar’s dry, wind-battered soil shifts more than people expect, especially on hillside and equestrian lots north of the 210. A gate sags in the hinge post, not the middle. When footings have moved, resetting the post in fresh concrete and re-aligning the gate beats shimming and hoping. We dig out the old footing, set the post true, and weld the gate back to it. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Slide gates in Sylmar’s horse zones take a beating. When a 12-to-16-foot ranch gate jumps its bottom track, the rail itself often bends or cracks. We straighten rails, weld cracked sections, and replace worn roller assemblies so the gate travels smoothly. If the rail is beyond saving, we’ll tell you honestly and quote a new rail rather than patching something that will fail under the next wind event.
Custom Welding
Sometimes the gate doesn’t need a new part, it needs a weld that was never done right in the first place. We do on-site welding for cracked frames, broken pickets, custom gate modifications, and hardware fabrication. Your gate stays in your driveway. You watch the work happen. And because we weld it ourselves, we stand behind it with the same 90-day promise as everything else.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sylmar
We service operators and hardware from LiftMaster, DoorKing, and Mighty Mule, among others, and we keep common parts stocked for Sylmar customers so you’re not waiting a week for a bracket or a roller. Older DoorKing operators are everywhere in Sylmar’s 1970s and 1980s neighborhoods, and we’re comfortable retrofitting them with modern safety photocells and new control boards. A good operator can outlive two or three hinge replacements if it’s installed and maintained by someone who actually knows the equipment.
Common Gate Parts & Welding Problems We See in Sylmar Homes
- Post-storm hinge failures on aging wrought iron gates. Santa Ana gusts through the Newhall Pass catch broadside panels, snap welds, and shift post footings. We see this pattern after nearly every major wind event between October and February.
- Ranch slide gates jumping their bottom tracks. Equestrian properties in northern Sylmar have heavy 12-to-16-foot sliding gates that act like sails in high wind. The gate panel jumps the track, the rail bends, and it won’t move until someone straightens everything and re-seats the rollers.
- Heat-related hardware binding. Sylmar records some of the highest ambient temperatures in LA County, with summer days over 110°F. Rollers, hinge pins, and operator internals expand and bind far faster than in coastal or mid-Valley areas.
- Obsolete operators with no safety photocells. Many Sylmar gates were hung before modern entrapment protection existed. We retrofit older LiftMaster, DoorKing, and Mighty Mule operators with current safety edges and photocells so the gate holds protection requirements and doesn’t hurt someone.
Pricing for Gate Parts & Welding in Sylmar, CA
Here are honest ranges for Sylmar’s market, based on the work we’ve done across 91342 and surrounding neighborhoods. Hinge replacement on a standard single swing gate typically runs $180-$340 depending on post condition. Post replacement with a new footing runs $350-$650 per post, more if the old footing is oversized or on a hillside. Rail repair for a slide gate runs $150-$400. Custom welding starts around $150 for a small crack repair and goes up from there based on time and materials. On legacy gates, retrofitting the hinges and operator often costs less than a full replacement, and we’ll always quote it that way. You get a written price before any work starts, and you can take $40 off any repair over $200. Call (818) 514-7606 for a free estimate.
We Also Serve Cities Near Sylmar
Our Gate Parts & Welding team works across the northern Valley, from Sylmar down through San Fernando, Granada Hills, Northridge, and Van Nuys. The wind patterns and gate failures near the pass are different from what you see in those flatter neighborhoods, and we treat them that way.
Serving Sylmar, CA - Our Local Coverage Area
We’re based in the Sylmar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sylmar
The wind isn’t just pushing your gate. It’s catching the full panel broadside and levering against the hinge post. Over time, the hinge holes elongate, the welds fatigue, and the post itself starts leaning. The fix is reinforced hinge plates and, often, a reset post footing. Call (818) 514-7606 and we’ll come out and show you exactly where it’s failing.
In most cases, yes. The sag comes from the hinge post, not the panel itself. We weld in reinforcement, reset the hinge geometry, and the gate hangs straight again. Replacing the whole frame is only necessary when the metal itself is too rusted to hold a weld. An estimate is free, so you’ll know the answer before you spend anything.
No. We straighten the rail, replace worn rollers, and often add a heavier bottom roller or a wind guide to keep the gate seated. The broadside panel on an equestrian gate puts enormous leverage on the track, and the right rollers make the difference. Call (818) 514-7606 for an exact quote on your gate.
Metal expands in sustained 110°F heat, and clearance that worked in spring binds in August. Rollers seize, hinge pins wear oblong holes faster, and operator internals overheat. We use higher-tolerance rollers and reinforced hinge hardware on Sylmar gates specifically to handle the summer heat cycle. Ask for a heat damage check when you call.
Current California safety standards require entrapment protection on automatic gates, which includes photocells or safety edges. Many older Sylmar operators predate those rules. We can retrofit your existing LiftMaster, DoorKing, or Mighty Mule operator with current safety sensors rather than replacing the whole unit. Call (818) 514-7606 for a free assessment.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sylmar since 2001.