Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Beverly Hills
Older gates and aging operators are the rule in Beverly Hills, not the exception. We get called out for hinge posts that have pulled out of plumb on hillside lots, control boards on legacy LiftMaster and FAAC operators that estate managers can no longer integrate with Crestron or Savant, and original 1920s wrought-iron gates in the flats that need reinforcement without losing their historic character. Gatewood Fence & Gate has been locally owned and owner-operated since 2001, and we weld on site so your gate stays in your driveway. Call (818) 514-7606 any time. A live person answers.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. We’re not a dispatch queue. When you call (818) 514-7606, you get a person, not a voicemail tree. For Beverly Hills homeowners and estate managers, that matters because gate work here rarely stops at the mechanical fix. There’s usually an access control system, a security director who needs to approve the work, or a property where the gate has to blend with 1920s architecture. We show up in uniform, we’re background-checked, and the person who answers the phone is the same person who knows what happened on your last service call.
Our Gate Parts & Welding team has seen just about every failure mode Beverly Hills can throw at a gate. The 90-Day Done Right Promise is printed on every job, not buried in fine print. If it’s not done right, Hal comes back. No runaround. No arguing about whether the repair “took.” One call brings him back.
We also respect that Beverly Hills is its own municipality. The permit process is different here than in the surrounding City of Los Angeles, and we handle it the right way, filing Beverly Hills permits when the work requires them. A contractor who files an LA permit on a hillside estate job will fail inspection. We don’t make that mistake because Beverly Hills is where we work, not just a town we drive through.
Our Gate Parts & Welding Services in Beverly Hills
Hinge Replacement
Beverly Hills has two distinct gate environments. South of Sunset, the 1920s through 1950s Spanish Colonial, French Normandy, and Tudor properties still carry original ornamental wrought-iron gates with decades of deferred hardware wear. The hinges on those gates are often fatigued to the point where the gate sags even when the post is sound. North of Sunset, including Trousdale Estates, the heavier custom gates on steep grades put hinge geometry under constant load. We stock heavy-duty commercial hinges and weld them in place. No taking your gate to a shop. It stays on your property, we cut out the old hardware, weld in the new, and you have a gate that swings true.
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. On hillside properties north of Sunset, soil movement and Santa Ana wind loads work together to pull posts out of plumb. We see it constantly. We excavate around the post, check the footing, and weld a reinforced footing if the concrete is still sound. If the post itself is rusted through at the base, common with older steel posts in the marine-layer humidity, we cut it out and weld in a new one. The fix is structural, not cosmetic.
Rail Repair
The bottom rail on a custom dual-leaf swing gate takes the brunt of the abuse in Beverly Hills. Wind loading from Santa Anas flexes the rail, and over years the welds at the stile fatigue and crack. On ornamental gates in the flats, rust pitting from the marine layer thins the rail until it fails. We grind out the cracked welds, straighten the rail, and re-weld with full penetration. On gates where the rail is too far gone, we fabricate a replacement section that matches the existing scrollwork as closely as possible.
Custom Welding
Some Beverly Hills gates cannot be bought off a shelf. Original 1920s wrought-iron designs, mid-century modern gates in Trousdale, custom pieces fabricated for a specific stone pillar. We weld on site, which means we can match the exact proportions of your existing gate, reinforce it, or build a new section that reads as original. Hal has been doing this since 2001, and the work holds up because he welds it properly, not because he hides it behind paint.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We’re certified to service Viking, Ghost Controls, and DoorKing operators, plus Elite slide gate motors, which show up regularly on larger Beverly Hills estates. We stock parts for these brands locally, so a blown control board or stripped drive gear doesn’t mean waiting two weeks for a factory shipment. When an older Viking operator on a Trousdale gate needs to integrate with a Savant system, we handle the wiring and the communication protocol. When a DoorKing loop detector in the flats has corroded terminals from the marine layer, we replace the board and reseal the housing. The part matters less than the person installing it, and the person installing it knows these brands.
Common Gate Parts & Welding Problems We See in Beverly Hills Homes
- Santa Ana wind damage on dual-leaf swing gates. These wind events push large custom gates to the limits of their hinge and operator ratings. Bent hinge posts, stripped drive gears, and blown control boards in a single night are common north of Sunset.
- Marine layer corrosion. The fog that settles over the hills accelerates rust pitting on decorative ironwork and corrodes low-voltage loop detector terminals faster than the drier flats of West Hollywood. We see terminals that look fine until you pull the connector and the copper crumbles.
- Obsolete control boards on legacy operators. Estate managers in Beverly Hills routinely try to integrate older LiftMaster or FAAC operators with modern Crestron or Savant systems. The old boards don’t speak the language, and the gate stops responding to the app entirely.
- Historic gates with deferred hardware wear. The 1920s to 1950s gates south of Sunset were built beautifully. They were not built with modern safety requirements in mind, and the hardware has been quietly failing for decades. Homeowners often don’t know until a hinge shears and the gate drops.
Pricing for Gate Parts & Welding in Beverly Hills, CA
Hinge replacement in Beverly Hills typically runs $280 to $620 per hinge, depending on whether we’re welding a new heavy-duty hinge onto an existing post or reinforcing the post itself, which is common on hillside lots. Post replacement runs $900 to $2,400 when excavation and a new concrete footing are needed. A typical custom welding job, like a cracked bottom rail or a bent stile on a decorative gate, runs $350 to $1,100. A full gate fabrication starts around $2,800 and goes up from there based on size and scrollwork. The price is quoted and agreed before any work starts, and we offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (818) 514-7606 for an exact quote. Estimates are free.
We Also Serve Cities Near Beverly Hills
We work across West Hollywood, Sherman Oaks, Santa Monica, and North Hollywood, and our scheduling is coordinated from our Los Angeles office so crews reach Beverly Hills quickly. Whether you’re in the flats or the hills, the same crew, the same owner, and the same 90-Day Done Right Promise apply.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Beverly Hills
Yes, in most cases we can add photo-eye sensors and a monitored safety edge to an older swing gate operator without tearing out the whole unit. The photo-eyes wire into the existing control board’s safety input, and the edge mounts along the leading edge of each gate leaf. Some very old boards lack a compatible safety input, which is where the project can get tricky. If the board won’t accept the safety circuit, we’ll tell you that honestly and give you a written price for a board replacement instead, not a surprise invoice later. Call (818) 514-7606 and we’ll walk through what your operator can actually support.
We excavate around the post, check the condition of the concrete footing, and determine whether the post itself is bent or the footing has shifted. On most hillside gates, the footing has cracked and the post is leaning. We can often weld a reinforced footing around the existing concrete and pull the post back to plumb before re-hanging the gate. If the post is rusted through at the base, we cut it out and weld in a new one. This is not a job to patch with shims. Fix the post and the gate stays fixed. Call (818) 514-7606 for a free estimate.
Welding a new gate onto an existing pillar usually does not trigger a Beverly Hills gate operator permit on its own, but any new operator installation or significant structural work on the pillar may. Beverly Hills Building & Safety issues its own permits and has setback and sight-line rules distinct from the surrounding City of Los Angeles. We check the scope against city requirements before we start and file the Beverly Hills permit when the work calls for it. We will not file an LA permit on a Beverly Hills job and let you fail inspection. Call (818) 514-7606 and we’ll tell you whether your project needs a permit before we cut anything.
Sometimes, but the loop detector is the weak link. A Viking operator will accept a relay input from an older DoorKing detector if the detector is still functional and the loop itself is intact. The marine layer in the flats corrodes the low-voltage terminals on those older detectors, and the loop wires embedded in the driveway can fail from years of soil movement and vehicle traffic. If the detector and loop test good, we wire them into the new Viking operator. If they don’t, we replace the detector and, when needed, cut and install a new loop. Call (818) 514-7606 and we’ll test the loop before we quote the operator, so you know the real number up front.
Yes, we can weld reinforcing plates and gussets to the back side of the gate structure, where they’re not visible from the street, and we can replace the original hinge hardware with heavier-duty hinges that mimic the original profile. The original scrollwork and silhouette stay intact. We’ve done this work on the older Spanish Colonial and Tudor properties south of Sunset, and the result is a gate that reads as original but no longer flexes in the wind or sags on its hinges. It’s one of the more satisfying jobs we do because you get to keep the history and stop worrying about the gate falling off. Call (818) 514-7606 and we’ll come look at what you have.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.