Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Beverly Hills
Gate motor and opener repair in Beverly Hills usually costs between $325 and $1,800 depending on whether we’re rebuilding a stripped drive gear, replacing a burned-out control board, or installing a torque-rated operator on a hillside estate gate. Most repair calls in the flats south of Sunset get same-day service, and we answer the phone with a live person around the clock. Beverly Hills has more motorized estate gates per block than almost anywhere in the country, and a good number of those calls involve more than a mechanical fix. They involve Crestron or Savant integration, security firm access protocols, and a permit process that catches out-of-town contractors by surprise. Hal Gatewood has been fixing gates since 2001, and the name is on the shop and every invoice. Call (818) 514-7606 and you’ll get Hal or a member of his crew, not a voicemail tree.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Motor & Opener Company
Most of our Beverly Hills work comes from referrals. A property owner in The Flats has a neighbor in Trousdale Estates whose swing gate stopped opening after the last Santa Ana event, and within a week we’re standing in both driveways. That’s how it goes when the shop is local and the owner’s name is on every job. We have been owner-operated since 2001, and we service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our crew is background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
We know Beverly Hills Building & Safety runs its own permit jurisdiction, which means we pull Beverly Hills permits for Beverly Hills gate operator work. That detail matters. We’ve seen contractors pull an LA city permit on a hillside estate job and fail inspection because they didn’t realize Beverly Hills is an independent municipality with its own enforcement staff. We don’t make that mistake. We also know the streets: the tight turns on Alpine Drive, the gated compounds north of Sunset, the older Spanish Colonial properties around Roxbury Park where original wrought iron gates have decades of deferred hardware wear. You won’t have to explain how to find your property or why your gate post leans the way it does. We’ve seen it before.
Response time to Beverly Hills runs under two hours for most emergency repair calls, especially when a gate is stuck open, stuck closed, or grinding through a stripped gear. We coordinate directly with estate managers and private security firms when access needs to be staged, and we’re used to working around staff schedules and security protocols. Call (818) 514-7606 and a live person answers. That’s the whole point.
Our Gate Motor & Opener Services in Beverly Hills
Motor Installation
Gate motor installation in Beverly Hills means matching the operator to the gate’s weight, leaf length, and incline. A 900-pound custom dual-leaf swing gate on a Trousdale grade needs a different torque rating than a 20-year-old ornamental gate south of Sunset Boulevard. We install operators from FAAC, BFT, LiftMaster, DoorKing, Elite, and others, and we handle the full Beverly Hills permit path from submittal to final inspection. The price is quoted and agreed before any work starts, and that price holds.
Motor Repair
When a gate motor fails in Beverly Hills, it’s usually one of three things: a stripped drive gear from Santa Ana wind loading, a corroded low-voltage terminal from marine-layer moisture, or a burned-out capacitor on an older linear motor. We diagnose on site, show you exactly what failed, and fix the simplest thing that will actually hold. We don’t swap parts that don’t need swapping, and we don’t quote a repair over the phone that turns into a replacement at the door. The price we quote is the price you pay.
Linear Motor
Linear arm operators are common on Beverly Hills estate gates, and they take a beating when wind pushes against a long, heavy gate leaf. We rebuild linear arms, replace internal gears, and set travel limits correctly so the gate doesn’t slam into its stops on a windy night. We also check the gate itself. A linear motor that keeps stripping out is usually a symptom of a sagging hinge post, and we’ll tell you that straight rather than selling you a second motor six months from now.
Slide Motor
Slide gates with motorized operators work hard on properties where a swing gate would block a driveway or car court. We service slide gate motors on estates throughout Beverly Hills, from the flats around Beverly Gardens Park to the hillside compounds north of Coldwater Canyon. We align the chain or rack, set the travel limits, and adjust the safety edges so the gate stops instantly if anything is in the path. Every slide motor job includes a full gate alignment check because a slide gate that binds will burn out a new motor fast.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We’re certified to service nine major gate brands, and in Beverly Hills we see a lot of LiftMaster, DoorKing, and Elite operators on newer estate construction, plus Mighty Mule and Ghost Controls on older residential properties that were retrofitted years ago. We keep common control boards, remotes, photo eyes, and gear sets on our trucks, which means we can often finish a repair in one trip instead of making you wait for a part to ship. For specialized parts on older operators, we have local supply relationships that get parts into Beverly Hills quickly. If your gate motor says DoorKing or Linear or FAAC on the housing, we know the inside of it. We have been inside hundreds of them.
Common Gate Motor & Opener Problems We See in Beverly Hills Homes
- Santa Ana wind damage to dual-leaf swing gates. The same event that knocks over patio furniture bends gate arms and strips drive gears overnight. We see a spike in emergency calls every time the winds hit, especially on hillside estates where gates act like sails.
- Marine-layer corrosion on terminal connections. The damp air that settles over the hills south of Mulholland corrodes low-voltage terminals on gate motors faster than in the drier flats of West Hollywood or Sherman Oaks. Intermittent motor faults are often just corroded spade connectors, and we clean and seal them so they stay dry.
- Undersized operators on Trousdale Estates grades. Standard residential operators are not built for a gate that has to fight gravity on a steep incline. We routinely replace burned-out motors with torque-rated models that can actually move the gate without overheating every summer.
- Smart home integration conflicts. When a new gate operator is installed without reprogramming the Crestron or Savant system, the gate works from the fob but not from the house panel. We coordinate the mechanical repair with the automation system so everything talks to everything else.
Pricing for Gate Motor & Opener in Beverly Hills, CA
Gate motor repair in Beverly Hills typically runs $325 to $900 depending on the failure. Control board replacement usually lands between $450 and $850. A full operator replacement with installation runs $1,200 to $2,800 for most Beverly Hills estates, though a heavy custom dual-leaf swing gate on a steep hillside can push higher when it requires a torque-rated operator and hinge-post reinforcement. Linear motor rebuilds run $350 to $700. Slide gate motor service runs $400 to $1,100. Every job is quoted in writing and agreed before any work starts. We don’t charge a trip fee inside the county, seniors and veterans always get 10% off, and any repair over $200 takes $40 off. If you have a written estimate from another company, bring it in and we’ll give you a free second opinion. Call (818) 514-7606 for an exact quote.
One more thing about Beverly Hills pricing: a permit is part of a proper gate operator installation here, and that affects the total. A contractor who quotes low and skips the Beverly Hills permit will cost you more when the inspector catches it. We include permit coordination in our installation quote, and we’re the ones standing for the inspection.
We Also Serve Cities Near Beverly Hills
From our Los Angeles metro office, our gate motor and opener crews serve Beverly Hills and the surrounding communities: Beverly Hills itself, plus West Hollywood, Sherman Oaks, Santa Monica, and North Hollywood. If your property sits near the city line on Benedict Canyon or along the Wilshire corridor, you’re still in our regular service area. Our Gate Motor & Opener team covers the whole west side without a trip charge inside the county.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Beverly Hills
Beverly Hills Building & Safety issues its own permits for gate operator installations, and a contractor who pulls an LA city permit instead of a Beverly Hills permit will fail inspection on a hillside estate job. We handle the Beverly Hills permit from start to finish, including setback and sight-line compliance, and we’re the ones standing for the inspection. Call (818) 514-7606 if you want a straight answer about whether your gate needs a permit. Most motor replacements require one.
In most Beverly Hills hillside properties, especially in Trousdale Estates and along the grades north of Sunset, the original operator was sized for a flat lot. The motor works against gravity on every cycle, overheats, and fails early. We replace it with an incline-rated operator sized for the actual gate weight and leaf length, and we reinforce the hinge post so the gate doesn’t lean against the motor. That’s the difference between a motor that lasts three years and one that lasts fifteen.
Yes. We regularly pair new gate operators with existing Crestron or Savant control systems in Beverly Hills so the gate opens from the same app, wall pad, or automation scene the homeowner already uses. We coordinate with estate managers and security firms when the property has staged access protocols, and we test the integration before we leave the driveway. Call (818) 514-7606 to talk through your system’s specifics.
Yes. For Beverly Hills estates with large dual-leaf swing gates, we install wind-rated hinges and arms, set a wind-resistance profile in the operator’s control board, and reinforce hinge posts so the gate doesn’t twist in a gust. Most wind damage is avoidable when the operator is sized and mounted correctly. The next Santa Ana event is coming, and a gate that survives one has a better chance of surviving the next.
The quickest and most honest fix is to correct the hinge post before or during the motor replacement. A sagging gate puts constant strain on the operator, strips gears, and burns out capacitors about four times faster than a properly hung gate. On one Trousdale Estates hillside, our crew replaced a stripped FAAC swing gate operator with a torque-rated model suited for the steep grade, then realigned the sagging hinge post and reprogrammed the Crestron integration so the security firm’s access protocol stayed intact. Call (818) 514-7606 and we’ll take a look at the post before we sell you a motor.
If your gate motor is making noise, moving slower than it used to, or refusing to open at the worst possible moment, call (818) 514-7606. We answer with a live person, we’ll quote the price before any work starts, and the job comes with the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and the invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.