Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Hollywood
Gate parts and welding in North Hollywood usually breaks down to three jobs: a hinge post that cracked at the footing, a slide gate track that heat-racked out of alignment, or a weld that finally gave way after years of daily cycling. Most repairs run $120 to $480 and are done the same visit, because Hal welds on site instead of hauling your gate back to a shop. Call (818) 514-7606 and you’ll get Hal or one of his crew, not a menu.
We work the apartment enclosures off Lankershim, the bungalow side streets off Vineland, and the tighter shared driveways along Tujunga where a truck can’t block the entry. North Hollywood’s gate inventory is older and heavier than what you’ll find in Burbank or Studio City, and we stock parts and rod for the jobs this area actually throws at us.
Why Gatewood Fence & Gate Is North Hollywood’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop, the estimate, and the invoice. The same person who answers the phone is the person who shows up with a welder and a truck full of stock. When a property manager off Magnolia needs a post replaced before the afternoon rush, we’re not routing through some regional queue. We’re in the Valley, we know the buildings, and we answer the phone 24/7.
North Hollywood customers call us because the first outfit quoted a new gate and we welded the existing one back square for a third of the price. “Fix it, don’t replace it” is not a slogan. It’s the job. Every repair carries our 90-Day Done Right Promise in writing. If it fails, Hal comes back. No argument, no fine print.
We’re certified to service DoorKing, LiftMaster, and Elite operators, and we keep common boards, limit switches, and roller assemblies on the truck so a North Hollywood call doesn’t turn into two trips. Response to most North Hollywood addresses is same-day for non-emergency calls when you reach us before lunch. Emergency calls, especially a slide gate stuck open across a shared driveway, get a human on the phone no matter the hour.
Our Gate Parts & Welding Services in North Hollywood
These are the four jobs we do most in North Hollywood. Each one starts with a look at what’s actually failed, because a repair-first shop doesn’t sell you parts you don’t need.
Hinge Replacement
Hinge failure on a North Hollywood pedestrian gate almost always traces back to the post or the wall behind it. A wrought-iron gate mounted in a 1960s block wall eventually starts pulling the anchors loose, and the canter follows. We pull the gate, rebuild the mount, and re-hang it square. If the hinge itself is just worn out, we carry common barrel and strap hinges in steel and stainless so the gate closes clean the same day.
Post Replacement
On shared driveways off Lankershim and Vineland, a rotted or snapped hinge post means the gate sags into the path and can’t be left overnight. We cut the old post, pour and set a new one sized for the gate’s weight and throw, and often add a brace or re-weld the frame while the concrete cures. We stage the work so vehicle access keeps moving, posting the driveway when we have to and keeping tenants informed.
Rail Repair
Slide gates on North Hollywood apartment parking enclosures rack their top and bottom rails out of square as the steel heats and cools through 30-to-40-degree diurnal swings. The gate starts shrieking, then the top wheel hops, then it jams. We re-square the frame with heat and clamps, re-weld the rail joints, and replace bent or frozen guide rollers. If the rail is too far gone, we’ll cut in a new section rather than pitch the whole gate.
Custom Welding
Not every fix comes out of a catalog. Cracked lintel on a courtyard gate, a missing flange on a post base, a gate frame that somebody widened badly years ago. Hal welds on site, TIG or MIG depending on the material, so the gate never leaves your property. That matters in North Hollywood, where a missing gate on an apartment entry is an open invitation and a liability nobody wants to hold over a weekend.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
Most North Hollywood apartment gates still run DoorKing or LiftMaster slide operators, and plenty of bungalow driveways have a Mighty Mule swinging the car gate. We stock boards, limit switches, and rollers for all three because waiting on a distributor while a gate sits locked open on a Vineyard-area driveway is a problem we don’t hand back to you. If the operator is beyond saving, we’ll recommend a replacement sized to your gate’s weight and duty cycle, not whatever’s on the promo sheet.
Common Gate Parts & Welding Problems We See in North Hollywood Homes
- Heat-racked slide gate tracks on tight shared driveways. North Hollywood’s 100-plus-degree summer afternoons expand the steel frame, and by morning the gate is binding against the track and tripping the safety. Re-aligning and bracing the track stops the cycle.
- Weld fatigue at hinge pins on 1960s bungalow pedestrian gates. That daily 30-to-40-degree temperature swing works hardened steel joints loose over decades. The gate doesn’t fail dramatically. It just starts leaning, then rubbing, then dragging on the walkway.
- Legacy Linear operators failing locked at apartment enclosures. Late-1980s Linear boards die one afternoon and the gate parks itself across the only vehicle entry. There’s no room on most North Hollywood lots to swing-convert, so the fix is a modern slide operator on the existing track.
- Sun-cracked safety edges and corroded loop wire. Underground loop detector wire under a 40-year-old North Hollywood driveway has been baked and baked. When the gate stops detecting cars and starts bouncing back mid-cycle, it’s usually the loop, not the operator. We test before we quote.
Pricing for Gate Parts & Welding in North Hollywood, CA
Here’s what we see in North Hollywood, in real numbers:
- Hinge replacement on a pedestrian gate: $120-$260
- Post replacement (steel post set in concrete, gate re-hung): $340-$680
- Rail repair or re-square on a slide gate: $220-$480
- Custom welding, steel or wrought iron, per repair point: $95-$240
- Slide gate roller replacement, parts and labor: $180-$420
- Operator board or limit switch: $150-$410 depending on brand and board age
What moves the number is access, age of the hardware, and whether the gate is safe to work on or has to be cribbed while we cut. The price Hal quotes is the price you’ll pay, and it’s agreed before the welder fires. You get a written price up front. There’s no trip charge inside the county, and if a repair runs over $200, take $40 off. Seniors and veterans get 10% off, permanent. Call (818) 514-7606 and we’ll give you the number before we ever get in the truck.
We Also Serve Cities Near North Hollywood
We do the same gate parts and welding work across North Hollywood‘s neighboring cities: Van Nuys, Sherman Oaks, West Hollywood, and Beverly Hills. Different housing, same standard: fix it on site, stand behind it, and answer the phone. You can learn more about our Gate Parts & Welding services here, or just call the shop.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Hollywood
Yes, and we do it regularly. The new post gets poured and set, the gate is re-hung, and we stage the work so the driveway keeps moving except for short, announced windows when the gate has to come off the post. On a shared driveway off Lankershim, our crew replaced a cracked hinge post at the footing, then re-welded the frame and swapped a sun-baked LiftMaster for a slide-compatible unit so tenants kept using the same access the whole time. Call (818) 514-7606 if you need it done before the next board meeting.
North Hollywood apartment gates cycle dozens of times a day, often running on rollers that were undersized when the gate was installed in the 1980s. The Valley’s heat and dust load the bearings and the gate never gets a rest day. Rollers that would last a decade on a single-family gate in Sherman Oaks are done in four or five years here. We stock common sizes and replace them while the gate is still on the track. Call us for an on-site look at (818) 514-7606.
Most of the time we weld it. A cracked joint on a wrought-iron gate is a fatigue failure, not a death sentence, unless the metal has rusted through in multiple spots. Hal will grind the crack, re-weld the joint, and reinforce the weak point so it’s stronger than the original. You’ll get the repair quote before we touch it. If a replacement genuinely makes more sense, we’ll tell you that too, with numbers.
Usually yes. The gate’s steel frame, rollers, and track often outlive the operator by decades. We pull the dead Linear board or motor, mount a modern slide operator in its place, and wire it to the existing loop and safety edges. The gate stays on the existing track, so there’s no swing conversion and no new footing. If the gate is closing on its own, we’ll show you where it’s failing before we replace anything. Call (818) 514-7606 for a free estimate.
We do the work in stages and keep one lane open whenever the site allows. Welding and track repair happen on one side while the other side carries traffic. When the gate has to come off the posts entirely, we schedule that window with the property manager or owner ahead of time, usually mid-morning after the commute rush. The goal is simple: nobody’s parking on Lankershim because of us.
If your gate is grinding, sagging, or stuck open across a driveway in North Hollywood, call (818) 514-7606. You’ll get a straight answer and a written price before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Hollywood since 2001.