Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Encino, CA
If your gate won’t open, sags on its hinges, or grinds halfway on a 105-degree afternoon, you want the truck coming from someone who has fixed that exact gate on another Encino street this week. That’s how we work. Gatewood Fence & Gate handles gate repair across Encino from Ventura Boulevard up into the hills, usually arriving same day when something’s failed outright. Hal Gatewood has been doing this since 2001, and when you call our shop, a real person picks up at (818) 514-7606. Not a recording, not a call center, not a “we’ll route you to the nearest technician.” Just us.
The short answer to what most Encino homeowners ask first: a standard swing gate repair here runs about $180 to $340, a new operator install typically sits between $850 and $1,600, and electric strike or keypad work usually falls in the $120 to $250 range. We quote before we touch anything, and the price we quote is the price you pay. Below is everything worth knowing about Gate Repair in Encino and how it works differently here than anywhere else.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Encino Homeowners Choose Gatewood Fence & Gate
This is a word-of-mouth town above the Boulevard, and we have a simple story: the owner’s name is on the shop, the truck, and every invoice. Hal has been the one answering calls since 2001, and if something on a job doesn’t hold up, he comes back. In writing, every job carries a 90-Day Done Right Promise. Not “up to 90 days.” Not “in most cases.” Ninety days, one call, we return and make it right.
What that looks like in practice is different from most repair companies operating in the Valley. We weld on site in your driveway, in Van Nuys-adjacent flat neighborhoods and up on the hill streets above Ventura where custom ornamental steel is the norm and a trailer isn’t always practical. We show up in the window we give you. We don’t swap parts that don’t need swapping. And if you’ve got a written estimate from another company, we will give a second opinion on it at no charge. Encino over the years has sent us a steady stream of people who got a quote on the phone, then a different number at the door, and then found us, either from a neighbor or a search. That pattern is why our pricing is fixed before any work begins. Always.
We serve all of Encino, from the flat ranch blocks north of Ventura Boulevard down through Encino Hills and into the steeper streets along the Santa Monica Mountains edge.
Gate Repair Services We Offer in Encino
Gate Repair
A sagging gate, a panel that drags the driveway, hinges pulling out of a rotted post, a door that simply stopped latching. We repair what the gate needs, nothing more. Most repair work in Encino is done same-day, with a repair-first approach, because Hal would rather weld a hinge or reframe a post in your driveway than talk you into a new gate just to fill a trailer.
Learn more about our Gaate Repair services in Encino.
Gate Installation
This is measured, ordered, and scheduled; it is not a same-day job. We fabricate and install steel, tubular aluminum, and ornamental wrought-iron gates sized to your opening, including hillside driveways where slope and setback come into play. A free measure and a written price come first, sent with no trip charge inside the county.
Learn more about Gate Installation in Encino.
Gate Motor & Opener
Dead boards, burned capacitors, stripped plastic gears in a LiftMaster or Viking unit, or a motor that runs but won’t move the gate. We carry and service nine major brands, and we troubleshoot the operator and the gate together, because in Encino heat they fail together. New opener installs are quoted upfront and scheduled at your convenience.
Learn more about Gate Motor & Opener repair in Encino.
Gate Access Control
Keypads, intercoms, remote programming, gate-ready gate loops, and access integrations for homes where the gate talks to the front door. Encino’s hillside estates frequently have multi-layered systems, and we work on the operator and the electronics in the same visit, which matters when the panel is a DoorKing and the motor is a Ghost Controls and the previous installer left no notes.
Gate Parts & Welding
Replacement hinges, posts, rollers, track, pickets, and full on-site welding services. This is the part of the job where Hal gets genuinely annoyed by what he finds: gates that were “repaired” with shims and sheet metal screws when a proper weld would have ended it. We fix the panel and the post, because fixing one without the other is how you fix it twice.
Neighborhoods We Serve in Encino
Our service area covers the full stretch of Encino, with the same live-person response from Hermon Park to the base of Encino Hills. Typical response time for a broken gate with an emergency component is same-day; scheduling for new work is usually within a few days. We’re in these neighborhoods regularly:
- Amestoy Estates
- Encino Hills
- Balboa Highlands
- The Libbit Avenue corridor
- Rancho Estates south of Ventura
Why Encino’s Climate & Housing Affect Gate Repair
You can’t fix gates in Encino the way you fix them in Santa Monica or Mar Vista. The Valley’s heat-sink geography means summer days here run 10 to 15 degrees hotter than the Westside, regularly over 100°F on the flats and hotter still on exposed hillside driveways. That heat is hard on every moving part: lubricants break down, rubber seals turn brittle, and control boards in gate operators cook themselves, especially in black metal boxes facing south. We replace more burned capacitors in one Encino summer than in a year of coastal work.
Then comes the Santa Ana season. The wind funnels hard through the mountain passes above the north Valley, and every October and November brings a predictable wave of bent frames, gates that tore loose, and hinge posts cracked at the base. Encino homes built in the 1950s and 60s, mostly north of the Boulevard, still run on original hardware that was never designed for that repeated wind loading.
South of Ventura and into Encino Hills is a very different picture. Those are large custom estates and teardown rebuilds with heavy wrought-iron and ornamental steel gates, often on steep driveways where the operator has to work against gravity day and night. A gate drifting open on its own there is usually not the motor. It’s hinge-load and counterweight loss on a slope, and a technician from a flat-lot city who hasn’t dealt with it will misdiagnose it every time. We deal with it constantly. That’s the local specificity that keeps Encino operators honest.
Pricing for Gate Repair in Encino
Prices here tend to be straightforward, and we prefer it that way. A typical service call for hinge replacement runs $180-$280. Full re-hang of a steel gate with welding and post work lands around $300-$450. Operator or board replacement typically sits from $350 to $650 installed, depending on brand. New automatic operator systems on existing gates run $850-$1,600. We quote the full number before work starts, and it doesn’t change when the job takes longer than expected.
Standing offers: $40 off any repair over $200, no trip charge inside the county, free second opinions on written estimates, and a permanent 10% discount for seniors and veterans. One or two apply to most jobs; we’ll tell you which.
Service Area - Cities Near Encino
If you’re a few blocks outside Encino, we work across the Valley. That includes Tarzana, Reseda, Sherman Oaks, and Van Nuys. Same live-person line, same pricing.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Encino
Most repairs run between $180 and $450, depending on what failed. A simple hinge replacement on a standard swing gate is on the lower end; a cracked post or motor board replacement lands higher. You’ll always get an exact number by calling (818) 514-7606 before we start, and the $40-off-over-$200 offer applies to the majority of repairs we quote.
Usually, yes, especially if a gate won’t close and security is the issue. Same-day response is standard for emergency repair calls during the week in Encino, including hillside areas. One call goes to a person who can tell you the window we’ll get there: (818) 514-7606.
That’s worn or insufficient hinge load on a sloped installation. Gravity takes over as hinges wear, and the gate drifts open or shut on its own. It’s not the motor. We see it on hillside driveways throughout south Encino, and it’s a repair we address at the hinge and counterweight level, not by replacing an operator that isn’t the problem.
Usually, yes. Bent frames, torn hinges, and twisted panels are mostly repairable with on-site welding, which is how we prefer to handle wind damage on Encino properties. Replacement parts are only ordered when the material itself has failed. That repair-first approach is the whole reason Hal put his name on the shop.
We’re certified on nine major brands, including Viking, Ghost Controls, DoorKing, and Elite, and we service all of them across the Encino area. If you’ve got a model we can’t source parts for, we’ll tell you that in the first five minutes, not after a service fee. Call (818) 514-7606 and we’ll sort it out.
Need Gate Repair in Encino? Call Us
If your gate is giving you trouble, call Gatewood Fence & Gate at (818) 514-7606 for a free estimate. We’ll give you a straight answer about what’s wrong, what it costs to fix, and when we can be there. If you’d rather skip the phone, you can ask for Hal at the shop; same difference. The person you talk to is the person who stands behind the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Encino since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Encino Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg