Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair Services in Sherman Oaks, CA
If your gate is groaning, sagging, or simply refusing to open, you’re not alone. We get more calls from Sherman Oaks homeowners about heat-fried gate motors and grade-stressed hinges than almost any other failure. A live person answers the phone day or night at (818) 514-7606, and we schedule repair visits across the Valley with no trip charge inside the county.
Sherman Oaks has a particular gate problem. The hillside neighborhoods above Ventura Boulevard are dense with automated driveway gates installed during the 1980s and 90s. That entire generation of operators and hardware is now reaching end-of-life at the same time, and the Valley’s summer heat has been quietly killing them faster than any manufacturer expected.
We repair what others want to replace. That includes on-site welding in your driveway, not hauling your gate off to some shop. Hal Gatewood’s name is on the truck, the invoice, and the shop. If a repair isn’t done right, our 90-Day Done Right Promise brings us back, no runaround.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Sherman Oaks Homeowners Choose Gatewood Fence & Gate
We’ve been an owner-operated gate shop since 2001. That’s over two decades of fixing gates the right way, the first time. Sherman Oaks homeowners call us because they want a name they can verify and a person who will show up in the window they promised. Hal Gatewood answers the phone himself more often than not, and when he doesn’t, one of his crew does. Not a call center. Not a voicemail.
Homeowners in Dixie Canyon and Longridge Estates know us by name now. Those hillside driveways with steep grades are where we do some of our most careful work. A swing gate on a 15 percent grade wants to drift open or slam shut unless the original installer accounted for grade. Many callbacks on those hills trace back to a flat-valley technician who skipped the counterweight calculation on the original install.
We carry a strong local reputation, are licensed and insured, and service LiftMaster, Viking, Ghost Controls, and DoorKing operators among others. Your estimate is quoted and agreed before any work starts. Every job carries our written promise. And the shop has a published address, which means you can always find us if you need to.
Gate Repair Services We Offer in Sherman Oaks
We cover the full range of gate work in Sherman Oaks, from a simple hinge repair to a complete automation system. Here’s what that looks like:
Gate Repair
A sagging gate almost always starts at the hinge post, not in the middle of the panel. We fix the post, weld the hinge, and get the gate swinging true again. If your gate won’t close or the track is binding, we find the cause and repair it on site. Learn more about our Gate Repair in Sherman Oaks.

Gate Installation
A new gate in Sherman Oaks has to survive Valley heat and, on the hillsides, a real slope. We measure, order, build, and install gates that fit the grade and the style of your home. You get a written price before any materials get ordered. Learn more about Gate Installation in Sherman Oaks.

Gate Motor & Opener
When a gate motor burns out in Sherman Oaks, it’s usually because a 105°F day pushed a board past its limit, or a gear stripped under the strain of a misaligned gate. We diagnose the operator in place and replace or repair only what failed. We service LiftMaster, Viking, Ghost Controls, DoorKing, FAAC, and more. Learn more about Gate Motor & Opener in Sherman Oaks.

Gate Access Control
Keypads, intercoms, telephone entry, vehicle loop detectors, card readers. If it controls who gets through your gate, we install it and service it. Access control wiring is sensitive to the same heat that cooks gate boards, so we test every connection and seal what’s exposed.

Gate Parts & Welding
We weld on site. That means a cracked hinge, a broken picket, or a fractured track gets fixed in your driveway, not hauled across town. If a part does need replacing, we use quality hardware and our special-order access for hard-to-find pieces. And we never swap a part that doesn’t need swapping.

Neighborhoods We Serve in Sherman Oaks
We work all over Sherman Oaks, from the ranch-home flat streets south of Ventura Boulevard to the hillside drives that climb toward Mulholland. Most repair visits in Sherman Oaks happen within 24 to 48 hours of your call, and emergency calls often sooner.
- Dixie Canyon
- Longridge Estates
- Fashion Square area
- The hills above Ventura Boulevard
- The classic ranch streets near Woodman and Van Nuys Boulevard
Why Sherman Oaks’s Climate & Housing Affect Gate Repair
Sherman Oaks regularly exceeds 105°F in summer, and that’s 15 to 20 degrees hotter than coastal Los Angeles neighborhoods just a few miles west. Heat like that does real damage. Gate motors with LiftMaster or Viking control boards overheat and fail well before their advertised lifespan. Wooden gates, especially redwood and cedar, warp and blister. The rubber gaskets and insulation that keep moisture out of control boards dry out, crack, and let humidity in.
Then there’s the housing stock itself. The flat ranch homes built in the 1950s and 60s south of Ventura Boulevard typically have simple side-yard swing gates. Those are straightforward repairs. But the hillside homes built from the 1960s through the 1980s above Ventura often have long, steep driveways with automated swing or slide gates. Grade changes everything. A gate that works perfectly on the flat will sag, drift, or bind on the hill unless the installer accounted for the slope. We have seen gates original installers hung with standard hinges on a 12 to 18 percent grade, and within two years the gate is dragging the post out of plumb. Fix the panel without the post and you’ll fix it twice.
Santa Ana winds in the fall add one more failure mode. A strong wind event can knock a cantilever slide gate off its track or bend a hinge on a side-yard swing gate. We see those calls cluster in the days after a big wind, and we’re ready for them.
Pricing for Gate Repair in Sherman Oaks
Honest pricing is a core promise. You will know the price before we start, and it won’t change at the door. Typical gate repair visits in Sherman Oaks run between $180 and $450, depending on the failure. Here’s a closer look:
- Hinge or bracket repair: $150-$300
- Gate motor replacement: $400-$1,200 (depending on operator brand and horsepower)
- Control board replacement: $250-$650
- Track repair or realignment: $175-$400
- On-site welding repair: $120-$350
We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you already have. Seniors and veterans receive a permanent 10% discount. Call (818) 514-7606 for an exact quote. Estimates are free.
Service Area - Cities Near Sherman Oaks
We work throughout the San Fernando Valley and nearby areas. If you’re in Van Nuys, Encino, Tarzana, or North Hollywood, we cover those neighborhoods just as thoroughly as Sherman Oaks itself.
Serving Sherman Oaks, CA - Our Local Coverage Area
We’re based in the Sherman Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sherman Oaks
Most gate repairs in Sherman Oaks range from $180 to $450, with motor replacements running $400 to $1,200 depending on the operator brand and horsepower. Your exact price is always quoted and agreed before any work starts. Call (818) 514-7606 for a free estimate.
Yes, for genuinely urgent failures like a gate that won’t close or a broken spring that leaves your driveway exposed. Our crew serves Sherman Oaks locally and a live person answers the phone 24/7 at (818) 514-7606. Most non-emergency repairs happen within 24 to 48 hours.
Yes, and we know hillside installs cold. The Dixie Canyon and Longridge Avenue corridors have long, steep driveways that demand careful grade calculations. A motor that works fine on flat ground in Encino will strain and burn out sooner on a 15 percent grade if the gate itself isn’t balanced. We check the gate’s mechanical health before replacing any operator. Call (818) 514-7606 to schedule a look.
In most cases, yes. We repair first. If a post is solid and the panel is sound, we weld cracks, realign hinges, replace rollers, and keep your existing gate in service. Hal fixes the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping. That approach has been our whole business model since 2001.
We service LiftMaster, Viking, Ghost Controls, DoorKing, FAAC, BFT, Linear, Elite, and Mighty Mule. If your operator is a less common brand, call us anyway. We diagnose what’s actually failed and tell you straight whether it’s worth repairing or replacing. Call (818) 514-7606 and you’ll get a live person who can give you real answers.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sherman Oaks and the San Fernando Valley since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sherman Oaks Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly





Before
After
Before
After
Before
After