Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Reseda
When your gate won’t open at 7 a.m. on a Monday, you need someone who knows Reseda’s streets and shows up ready to weld, realign, or replace a burned-out operator the same morning. Our Reseda Gate Motor & Opener service covers everything from thermal burnout to full replacement. Gate repair in Reseda usually runs $180-$650 for most mechanical and electrical fixes, and we quote that price before we touch a single bolt. Hal Gatewood has been at this since 2001, and the shop stands behind every job with a 90-Day Done Right Promise in writing. Call (818) 514-7606 and a live person picks up. Not a voicemail, not a queue.
Why Gatewood Fence & Gate Is Reseda’s Preferred Gate Repair Company
Most of the gates we fix in Reseda were installed during a very specific window: the late 1980s and early 1990s, when apartment owners along Sherman Way, Reseda Boulevard, and Saticoy Street added automatic gates after a local crime spike. Those operators are now 30-plus years old, and the Valley heat has been cooking their motor windings for three decades. We see the same failure patterns block after block, which means we stock the parts that fail here, not the parts that fail in San Diego.
We’re a Gate Repair outfit that welds on site, in your driveway, instead of hauling your gate off to some shop across the county. Hal’s name is on the invoice and the shop address is published. You can drive to the shop and look him in the eye if you want to. That’s the kind of accountability national chains can’t offer.
Every call to (818) 514-7606 gets answered by a person. Every job gets the 90-Day Done Right Promise, stated plainly, not buried in fine print. If it’s not done right, one call brings us back.
We serve Reseda with background-checked, uniformed technicians who know the difference between a thermal overload fault and a bad capacitor. That matters when the operator that failed is guarding a 12-unit building on a 105-degree day.
Our Gate Repair Services in Reseda
Electric Gate Repair
Electric gate repair in Reseda means troubleshooting the operator, the control board, and the low-voltage wiring that runs through a decade of Valley heat. A typical electric gate repair runs $220-$480, depending on whether we’re replacing a capacitor, a limit switch, a control board, or the motor itself. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we pull a 1990s-era Linear board, we don’t just swap it. We check every junction box for aluminum conductor corrosion, because if we don’t, you’ll call us back in six months with the same fault code.
Automatic Gate Repair
Automatic gate operators in Reseda take a beating. Summer interior temperatures routinely cross 105°F, far hotter than coastal LA, and that heat degrades the hydraulic fluid and overheats motor windings faster than the manufacturer’s rating would suggest. Automatic gate repair in Reseda typically runs $250-$600. If the operator is a 1990s Apollo or Linear with aluminum low-voltage runs, we re-pull the corroded wiring alongside any operator work. Swapping the operator without reworking the runs guarantees a callback within a season. We’d rather fix it once.
Hinge & Post Repair
A sagging swing gate is almost never a gate panel problem. The failure is in the hinge post, where the weight of the gate meets years of clay soil movement. Reseda sits on expansive clay that heaves every winter and shrinks every summer, shifting concrete post footings and dumping swing gates out of plumb. Hinge and post repair in Reseda runs $180-$520 depending on the post’s condition. We weld, brace, or replace the post and hinge with proper Reseda Gate Parts & Welding rather than shoving a wedge under the gate and calling it good.
Gate Realignment
Warped aluminum and vinyl gate frames are common here. The flat Valley floor means no ocean breeze, so a dark-colored gate in the sun can hit 130°F surface temperature. That heat warps panels and binds hinges just enough to strain the operator. Gate realignment in Reseda typically runs $160-$400. We square the posts, re-level the gate, and adjust the stops so the operator isn’t fighting a bind every cycle. That’s the difference between a fix that lasts and a motor that burns out in August.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We repair and replace operators from DoorKing, Elite, Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, and Ghost Controls. We stock boards, remotes, safety edges, and loops for the brands Reseda’s gates actually use, especially the older DoorKing and Linear units still guarding apartment parking lots and rental single-family homes throughout the area. Sourcing parts locally for Reseda customers means a two-day wait turns into a same-day repair. If we don’t have it on the truck, we know who does.
Common Gate Repair Problems We See in Reseda Homes
- Burned-out operators in 1980s apartment complexes. The security upgrade wave of the late 1980s installed hundreds of automatic gate operators along Sherman Way and Reseda Boulevard. Thirty years of 105°F summers later, those motors are failing all at once.
- Corroded aluminum low-voltage conductors. On 1990s Apollo and Linear operators, the aluminum wiring corrodes inside junction boxes from a combination of age, extreme heat, and occasional moisture. The result is nuisance fault codes that ghost even a brand-new operator.
- Warpped gate panels and binding hinge posts. Dark vinyl and aluminum gates absorb brutal Valley heat, warping frames and throwing swing gates out of alignment. It binds the hinge post and strains the motor with every open-close cycle.
- Heaved post footings from expansive clay soil. Reseda’s clay soil swells in wet winters and shrinks in dry summers, gradually shifting concrete footings so the gate’s plumb line goes from straight to noticeably tilted by March.
Pricing for Gate Repair in Reseda, CA
You want real numbers. Here’s what typical gate repair work costs in Reseda right now. Electric gate repair runs $220-$480. Automatic gate repair runs $250-$600 depending on whether the motor, board, or wiring is the culprit. Hinge and post repair runs $180-$520. Gate realignment runs $160-$400. Weld and rust repair on steel gates runs $140-$380. On any repair over $200, we take $40 off. We never charge a trip fee inside the county. The price we quote on the phone is the price you pay when the work is done, and we quote it before any work starts. Every job carries the 90-Day Done Right Promise, plus a permanent 10% discount for seniors and veterans. Call (818) 514-7606 for an exact quote. Estimates are free.
We Also Serve Cities Near Reseda
Gatewood Fence & Gate serves Reseda and the surrounding Valley communities including Tarzana, Northridge, Encino, and Canoga Park. If your gate is acting up anywhere in the west Valley, the same crew that works Gate Repair in Reseda will answer your call.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Reseda
Reseda sits on the flat Valley floor where summer interior temperatures routinely cross 105°F, about 15-20°F hotter than coastal zones like Santa Monica or Venice. That heat cooks motor windings, degrades hydraulic fluid, and accelerates the breakdown of rubber seals and wiring insulation, so operators that might last 15 years near the coast give up in 8-10 years here. When a gate motor burns out in Reseda, it’s usually the heat as much as the age. Call (818) 514-7606 and we’ll diagnose whether it’s thermal failure or something else.
Look at the hinge post, not the gate panel. A sagging gate sags because the post has shifted or rotted, and in Reseda that shift is often from the expansive clay soil heaving against the concrete footing every winter. If the post moves, the gate drops, and the motor strains with every cycle. We’ll confirm the post is plumb before we quote any gate panel work.
If the aluminum low-voltage runs are corroded at the junction boxes, repairing just the operator isn’t worth it. We see this specific failure all over Reseda’s older apartment buildings and rental homes. A repair makes sense if the wiring is intact and the failure is isolated to a single component like a capacitor or limit switch. If the runs are corroded and the motor is weak, a replacement operator with rewired runs is the honest fix. We’ll give you the straight answer either way, quoted upfront.
Yes. If your gate opens or closes automatically, safety photocells are required by California safety standards, and we install or replace them on every automatic gate we service. In Reseda’s heat and dust, photocell alignments drift and lenses get filmed over with grime, which is a common cause of gates refusing to close. We check and replace photocells as part of any automatic gate repair.
Every 12 months. The heat bakes lubricant off metal parts faster than manufacturers expect, and the dust from Valley streets turns any remaining grease into grinding paste. A once-a-year service that cleans and lubricates rollers, greases the rack and pinion, and checks the limit switches keeps a Reseda gate running through the worst of summer. It’s cheaper than a burned motor in July.
Call Gatewood Fence & Gate for Gate Repair in Reseda
If your gate won’t open, grinds when it moves, or sags like it’s given up, call (818) 514-7606. A live person answers, day or night. We’ll give you a free estimate over the phone, show up on the day we say we will, and fix your gate right here in Reseda. Hal Gatewood’s name is on the shop, and the 90-Day Done Right Promise is in writing on every job. If it’s not done right, we make it right. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Reseda and the San Fernando Valley since 2001.