Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Reseda
Gate installation in Reseda usually runs between $1,900 and $6,800 for a full driveway gate with operator, and $900 to $2,400 for a pedestrian gate without automation. Most jobs take one to three days depending on whether we’re setting new posts in clay soil, running power, or retrofitting an opener onto an existing frame. We know the Valley’s heat and the way clay heaves post footings every winter, and we work around both. Call (818) 514-7606 and you’ll get Hal or someone on his crew, not a phone tree.
Reseda has its own rhythm when it comes to gate work. The blocks off Sherman Way and Reseda Boulevard are packed with 1980s apartment buildings whose automatic gates were installed during a security push that swept the neighborhood thirty-five plus years ago. Those operators are failing now, often all at once across a single block, because the Valley’s interior heat bakes motor windings and hydraulic fluid at a rate you just don’t see in Encino or Woodland Hills. We work those corridors weekly.
Why Gatewood Fence & Gate Is Reseda’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 and put his name on it. You can drive to the shop, walk in, and look him in the eye. That’s the accountability structure. We’re owner-operated, state-licensed, and insured, with a published address and a license number anyone can check. The person who answers the phone at three in the morning on a Wednesday is a live person. That’s been true since the first year.
We serve Reseda with installers who know the area cold. They understand that an apartment gate on Blythe Street has different wear patterns than a single family swing gate off Vanowen, and that a gate facing west on Saticoy takes more afternoon heat load than one on a north-south lot. That kind of local knowledge changes what hardware we recommend and how we set the posts. Every job carries our 90-Day Done Right Promise, in writing. If it isn’t right, one call brings us back. No runaround, no fine print games.
Gate Installation work in Reseda keeps us busiest with swing and slide gates on rental properties and older tract homes, which is exactly what this page covers. And when we say we serve Gate Installation in Reseda, we mean we’re here, regularly, not dispatching from two counties away.
Our Gate Installation Services in Reseda
Driveway Gate Installation in Reseda
A new driveway gate in Reseda runs $3,200 to $6,800 when you factor in the operator, safety photocells, and the concrete work. That range covers a standard steel or aluminum swing gate on a post-WWII tract home lot, the kind you see in the thousands from Victory Boulevard up to the Northridge line. We set the posts deeper than minimum code because the clay under Reseda heaves seasonally and a shallow footing shifts the whole gate out of plumb by late winter.
Pedestrian Gate Installation in Reseda
Pedestrian gates range from $900 to $2,400 in Reseda, depending on whether you’re hanging a simple yard gate or a heavier security gate with maglock or keypad access. Apartment buildings along Reseda Boulevard call us for this constantly: the walk gate beside the vehicle gate takes more daily cycles than anything else on the property and wears out hinges and closers fast in the heat. We stock hardware locally so a standard pedestrian gate install doesn’t wait on shipping.
Sliding Gate Installation in Reseda
Sliding gates in Reseda run $3,500 to $7,500, and the factors that move that number are the track length, the operator brand, and what’s under the concrete. The flat Valley floor means we’re pouring with clay heave in mind: a rack and pinion slide gate will bind and strip drive gears if the footing moves even half an inch. We lay out runs with expansion joints and use stainless steel track bolts so the first rainy winter doesn’t start corrosion at the connections.
Swing Gate Installation in Reseda
Swing gates cost $2,500 to $6,200 installed in Reseda. Dual-leaf double swing gates on wider driveways add $800 to $1,800 to that. The heat is your enemy here: aluminum frames warp and bind when temperatures sit above 105°F, so we specify heavier gauge steel or reinforced aluminum for west-facing gates that catch the afternoon sun. Hinge post failures are the most common failure mode we fix on existing Reseda gates. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We’re certified on nine major gate operator brands, and in Reseda the calls skew toward Linear, DoorKing, and LiftMaster. Those three dominate the 1980s and 1990s apartment installs throughout the corridor. We keep boards, limit switches, and photocell kits for those brands on the truck, which means a Reseda apartment building manager doesn’t wait three days for a part. When you replace an operator on a forty-year-old gate system, matching the brand matters less than matching the voltage and the cycle rating. We spec for heat, not for the badge.
Common Gate Installation Problems We See in Reseda Homes
- Warped aluminum frames from extreme Valley heat. When interior temperatures in Reseda hit 107°F and a dark-finished aluminum gate faces west, the frame expands enough to bind the hinges and throw the leaf off-plumb. We see it every July and August, and the fix is specifying steel or a heavier aluminum gauge from the start.
- Corroded aluminum low-voltage conductors at junction boxes. This one is almost a Reseda signature. 1990s-era operators wired with aluminum conductors corrode white at every junction after a winter or two of moisture intrusion, throwing ghost fault codes on loop detectors and photocells. Replacing the operator without re-running those runs guarantees a callback within a season.
- Post footings heaved by expansive clay soil. Reseda sits on Valley floor clay that swells when it rains and shrinks when it dries. Every late winter, post footings move. A single shift of half an inch knocks a swing gate out of plumb, and on a slide gate it binds the rack and strips the drive gear. We set posts below the active soil layer and wrap them to reduce friction from heave.
- Operator failure from heat cycling. Manufacturers rate motor windings for a lifespan that assumes normal ambient temperatures. Reseda’s sustained summer heat shortens that lifespan noticeably. The operator on an unshaded southwestern driveway off Vanowen will run hotter and fail sooner than the same unit in a coastal zip code. That’s the reality, and we plan for it.
Pricing for Gate Installation in Reseda, CA
Here’s what you’re looking at in Reseda right now. A basic pedestrian gate without automation: $900 to $1,600. A single swing driveway gate with operator: $2,500 to $4,900. A sliding gate with operator: $3,500 to $7,500. A double swing driveway gate with full automation: $4,200 to $6,800. Power runs, keypad entry, safety photocells, and gate locks move the number. The quote you get is the price you pay. We write it up front, we agree on it before any work starts, and it does not change at the door. That’s not a sales line; it’s how Hal runs every job.
Standing offers for Reseda customers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The senior and veteran discount applies to every job, every time, without asking. Call (818) 514-7606 and we’ll give you a number over the phone or come measure it properly, free.
We Also Serve Cities Near Reseda
If your property sits just over the line, we run the same crews out to Tarzana, Northridge, Encino, and Canoga Park. The soil and heat behave the same across the Valley floor, so everything on this page applies there too. Same pricing, same 90-Day Done Right Promise, same live person on the phone.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Reseda
Reseda sits on the flat interior floor of the San Fernando Valley, where summer temperatures run 15 to 20 degrees hotter than coastal and foothill zones like Encino and Woodland Hills. That sustained heat overheat cycles motor windings and degrades hydraulic fluid at nearly double the rate, so operators here wear out noticeably faster. It’s not a manufacturing defect. It’s geography. Call us at (818) 514-7606 and we can tell you if your existing operator is running too hot where it mounts.
In most 1980s-era apartment buildings off Sherman Way and Reseda Boulevard, the wiring is the issue. We routinely pull operators that throw nuisance fault codes every afternoon, then find aluminum low-voltage conductors corroded white at every junction box. Swap only the operator and you’ll see the same faults within a season. We re-run keypad entry and safety photocell cable in marine-grade wire and replace the corroded boxes. Call (818) 514-7606 and we’ll give you a straight answer on your specific property.
Because the problem is in the post footing, not the hinge. Reseda’s expansive clay swells with winter rain and shrinks through summer, and that movement shifts the concrete post base every year. You can put new hinges on a post that moved and the gate will sag again next season. We set new posts below the active soil layer and use deeper footings than standard, which is the only approach that holds through repeated dry-wet cycles. A gate sags in the hinge post, not in the middle.
Galvanized or stainless steel components, full stop. Painted mild steel rusts at the weld points and hinge barrels after the first couple of Valley winters, and raw aluminum is just too soft for hinge pins under the load of a Reseda sun-baked panel. We use galvanized structural posts, stainless hinge pins and bolts, and marine-grade low-voltage wiring on every install in Reseda. The upfront cost is a little higher. The replacement cost for doing it cheap is a lot higher.
Yes. Automatic vehicular gates in Reseda, like everywhere in California, are subject to UL 325 and state code that requires working safety entrapment protection, which means photocells at minimum and usually reverse sensors on the gate edge. If the photocells on your building’s gate are faulting or bypassed, call (818) 514-7606. We can test the current setup and tell you exactly what’s needed to bring it into compliance. Liability on a non-compliant apartment gate is not something to gamble with.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Serving Reseda and the surrounding Valley with gate installation and repair since 2001.