Automatic Gate Repair in Tarzana, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Automatic Gate Repair in Tarzana, CA

Our How Much Does Gate Repair Cost? (2026 Price Guide) - Tarzana, CA breaks it down, but automatic gate repair in Tarzana typically runs between $150 and $450, depending on whether the issue is a simple sensor misalignment or a more complex circuit board failure. We provide same-day troubleshooting for most gate systems and offer upfront pricing so you know exactly what you are paying before we start the work. If you are dealing with a gate that won’t open, is stuck halfway, or is making grinding noises, call us at (818) 514-7606 to get a professional out to your property.

I have been operating Gatewood Fence & Gate since 2001, and in that time, I have seen just about every way a gate can fail. Whether you have a heavy wrought iron driveway gate or a modern automated swing gate, the mechanics are fairly straightforward, but they require a steady hand and a clear eye. When you call us, you are not getting a call center or a dispatcher; you are getting a team that understands the specific demands of the Tarzana climate, where the heat and dust can wreak havoc on sensitive motor components and photo-eye sensors. We handle Gate Repair in Tarzana with a focus on fixing what is broken rather than trying to sell you a brand-new system you do not need.

My philosophy is simple. I put my name on the shop, and I put my name on every invoice. If you have an issue with your gate, I am the person who stands behind the work with our 90-Day Done Right Promise. If it is not fixed correctly, I come back and make it right. That is how we have stayed in business for over 29 years. You can find us at our local shop, and if you ever need to speak with me directly, you know exactly who to ask for.

When You Need Automatic Gate Repair

You generally know when a gate is failing, but you might not know why. Often, homeowners in Tarzana wait until the gate is completely stuck before calling for help. If you notice these symptoms, it is better to address them early before the motor burns out or the chain snaps.

• The gate makes grinding or scraping sounds: This usually points to a failing gear or a lack of lubrication, but it can also mean the gate is dragging on the driveway surface.
• The gate stops or reverses unexpectedly: This is almost always a sensor issue. In our area, dust, spiderwebs, or even overgrown landscaping can block the photo-eye sensors, causing the safety system to think there is an obstruction.
• The remote or keypad is unresponsive: If the gate works manually but not with your clicker, we need to look at the receiver board or the antenna signal strength.
• The gate is sagging or leaning: A gate that looks crooked at the hinge post is a structural issue. If you do not fix the post, the motor will eventually strip its gears trying to move the misaligned weight.
• The gate moves at a jerky speed: This is often a sign of a failing capacitor or an electrical issue within the motor housing, which is common in older systems like some early LiftMaster or DoorKing models.

If you see any of these signs, give us a call at (818) 514-7606. We do not charge a trip fee inside the county, and we provide free second opinions on any written estimate you might have already received from another company.

Our Automatic Gate Repair Process

I do not believe in guessing games. When we arrive at your property, we follow a strict, logical process to identify the root cause of the failure. We do not just swap out parts to see what happens. We diagnose, we fix, and we test.

1. Initial Assessment: I or one of my technicians will inspect the entire system, starting with the power supply and moving to the mechanical drive components. We look at the hinge posts, the chain or belt tension, and the motor housing.
2. Safety Check: Because automated gates involve high-voltage electricity and, in some cases, high-tension springs or heavy moving parts, we ensure the safety entrapment devices are functional. Never try to adjust high-tension springs yourself, as they can cause severe injury.
3. On-Site Troubleshooting: We check the control board for error codes. If the board is faulty, we test the connections before assuming it needs replacement. If the issue is mechanical, such as a broken weld, we perform the repair on-site.
4. Component Repair or Replacement: We stock parts for major brands like LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If we can fix your existing motor, we will. We only recommend replacement if the motor is beyond repair or if parts are no longer manufactured.
5. Final Testing: Once the repair is complete, we run the gate through at least ten full cycles to ensure it opens and closes smoothly, stops where it should, and responds to all safety sensors.

Every job we complete is backed by our 90-Day Done Right Promise. If the gate acts up again within that window, we return to fix it. We are not just passing through Tarzana; we are part of the community.

Automatic Gate Repair Pricing in Tarzana

We believe in upfront pricing. You will never be surprised by a bill when we are finished. While every repair is different based on the parts required and the complexity of the gate system, here are the standard ranges for our services in the Tarzana area.

We offer a $40 discount on any repair over $200. If you are a senior or a veteran, we provide a permanent 10% discount. We do not have hidden trip charges for our neighbors in the county. If you have an estimate from another company, show it to us. We will provide a free second opinion, and if we can do the job for less or with better quality, we will tell you.

FAQs - Automatic Gate Repair

Is it cheaper to repair or replace my gate motor?

Most of the time, it is cheaper to repair. Many companies will try to push a full replacement because it is easier for them than diagnosing a circuit board or providing Electric Gate Repair like fixing a capacitor. I prefer to fix what you have if the motor frame is solid and the major components are still supported. If your motor is over 15 years old and the manufacturer no longer makes parts, then replacement is the only logical choice. Call (818) 514-7606 and I will give you an honest assessment of your specific unit.

Can you fix my gate today?

We do our best to offer same-day service for emergency repairs. If your gate is stuck open and you cannot secure your property, that is an emergency. We answer our phones 24/7, so you can reach us at any hour. While we cannot guarantee a same-day slot for every single call, we prioritize security-related failures.

What if I have an older gate system that no one else wants to touch?

I have been working on gates since 2001, and I have seen a lot of legacy systems. Even if a brand is no longer in production, we can often retrofit modern controls or find compatible parts to keep your existing gate running. We do not turn away work just because it is old or difficult. If it is metal, we can weld it; if it is electrical, we can trace the circuit.

Why does my gate keep stopping in the middle?

This is almost always a safety sensor issue. The photo-eyes are designed to stop the gate if they detect an obstruction. If the alignment is off by even a fraction of an inch, or if the lenses are dirty, the system defaults to “safe mode” and stops the gate. In Tarzana, we see this often due to the dust and wind. We can clean, align, and test your sensors as part of our Gate Realignment service to ensure they are functioning reliably.

If your gate is giving you trouble, do not wait for it to fail completely. A small adjustment now can save you from a major repair or a complete motor replacement later. We are home-grown and ready to help. Call us at (818) 514-7606 to get a free estimate or to schedule your repair.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana.