Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElectric Gate Repair in Tarzana, CA
Electric gate repair in Tarzana typically costs between $150 and $450, depending on whether the issue stems from a simple Gate Realignment, a worn-out chain, or a faulty circuit board. At Gatewood Fence & Gate, we provide same-day service for most gate failures, ensuring your property remains secure and accessible without the need for a full system replacement. If your gate is acting up, call us at (818) 514-7606 for a free estimate and honest advice from someone who has been fixing gates in this area since 2001.
When you call us, you get a live person on the line, not an automated system or a dispatch center located in another state. I am Hal Gatewood, and I have built my business on the idea that if a gate can be fixed, it should be fixed. We do not push for expensive replacements when a repair will do the job just as well. We are the home for reliable, owner-operated gate service in the San Fernando Valley. If you are looking for our broader range of services, you can find more details on our main Gate Repair in Tarzana page.
When You Need Electric Gate Repair
A gate that won’t open or close is more than just a nuisance. It is a security risk for your home. In Tarzana, we see a lot of wear and tear caused by our specific local climate, including intense summer heat that can bake sensitive electronics and the fine dust that settles into tracks and rollers. You should look for Gate Repair Near Me in Tarzana, CA if you notice these signs:
- The gate makes a grinding or screeching noise: This usually points to a lack of lubrication or, more often, a gear that is starting to strip. If you hear metal on metal, stop using the gate immediately to prevent the motor from burning out.
- The gate moves a few inches and then reverses: This is almost always a safety sensor issue. The photo-eyes might be misaligned, or the sun might be hitting the sensor directly, blinding it.
- The gate stays open and will not close: This is a major security concern. It could be a faulty logic board, a bad limit switch, or a stuck relay. We can diagnose this on the spot.
- The gate sags or drags on the driveway: A gate that drags is putting immense stress on the hinges and the operator arm. We often see this when the hinge post has shifted or the welds have cracked.
- The remote or keypad is unresponsive: If your gate works with the manual release but not with your clicker or keypad, we need to look at your radio receiver or the antenna connection.
If you are dealing with any of these issues, please do not try to force the gate open or closed. These systems, especially the high-voltage electrical components and the high-tension springs on some gate types, can be dangerous. Let a trained professional handle the troubleshooting. Call us at (818) 514-7606, and we will get someone out to take a look.
Our Electric Gate Repair Process
I believe in a repair-first philosophy. Many companies will walk up to a gate, see a ten-year-old motor, and immediately tell you that you need to replace the entire system. That is not how we operate. We inspect the system as a whole to find the root cause, not just the symptom. Here is how we handle a repair call:
- Diagnostic Inspection: We start by testing the gate’s movement and checking the power supply. We look at the logic board for signs of heat damage or insect intrusion, which is common in our area.
- Safety Check: Before we touch anything, we verify that the safety loops and photo-eyes are functioning. If these are not working, the gate is a liability.
- On-Site Component Repair: We carry parts for major brands like LiftMaster, DoorKing, and Elite on our trucks. If a gear is stripped or a chain is loose, we fix it right there in your driveway.
- Welding and Structural Work: If the gate frame has cracked or the hinges are pulling away from the post, we perform on-site welding. We do not need to take your gate to a shop. We fix it where it stands.
- Testing and Calibration: Once the repair is done, we cycle the gate multiple times to ensure the limit switches are set correctly and the gate stops exactly where it should.
Every single job we complete is backed by our 90-Day Done Right Promise. If we repair something and it fails again within 90 days, I will come back and make it right. No runaround, no excuses. My name is on the shop, and my reputation is on the line with every invoice we hand out.
Common Issues We See in Tarzana
Tarzana presents unique challenges for electric gates. The heat is a major factor. Electronic boards in gate operators have capacitors and relays that can fail prematurely if they are constantly subjected to extreme temperatures without proper ventilation. We often find that older units, particularly those from brands like Viking or BFT, just need a board swap or a capacitor replacement rather than a new operator.
We also see a lot of problems with gate hardware that wasn’t installed for our local soil conditions. If your gate post is set in shallow concrete, the movement of the earth over time can cause the gate to sag. We don’t just fix the gate; we check the foundation to make sure the fix will last. We want to be the last company you have to call for this gate.
Safety is non-negotiable. If you are working on your own gate, please be aware that the high-voltage wiring inside the operator box can be lethal. Even when the gate is unplugged, capacitors can hold a significant electrical charge. If you are not a trained technician, please stay away from the internal wiring. If you have any doubt about the safety of your gate, call us at (818) 514-7606.
Electric Gate Repair Pricing in Tarzana
We believe in upfront pricing. You will never be surprised by an invoice at the end of a job. We offer free estimates, and we provide a second opinion on any written estimate you have received from another company. We also have standing offers to make our service more accessible: $40 off any repair over $200, no trip charge inside the county, and a 10% discount for all seniors and veterans.
| Service Type | Estimated Price Range |
|---|---|
| Sensor Alignment or Cleaning | $150 – $225 |
| Circuit Board or Capacitor Replacement | $250 – $450 |
| Chain or Belt Drive Adjustment | $175 – $300 |
| On-Site Welding and Hinge Repair | $200 – $400 |
Please remember that these ranges are estimates based on standard parts and labor. The final price depends on the specific brand of your operator and the complexity of the repair. Give us a call at (818) 514-7606 for an exact quote. We are here to help, not to upsell.
FAQs – Electric Gate Repair
How do I know if I need a repair or a full gate replacement?
Most of the time, you only need a repair. We can replace motors, circuit boards, sensors, and rollers on almost any system, including Mighty Mule and Ghost Controls units. If the gate frame is severely rusted through or the post foundation is completely failed, we might suggest a replacement, but we always try to fix what you have first.
Can you fix my gate today?
We prioritize urgent calls, especially when a gate is stuck open and exposing your home to the street. Because we are locally owned and owner-operated, we can often get to your home in Tarzana the same day you call. Call (818) 514-7606 to check our current schedule.
Do you charge a trip fee to come out to Tarzana?
No, we do not charge a trip fee inside the county. We offer free estimates for all our repair work, so you can get a professional assessment of your gate without any financial commitment.
Are you licensed and insured?
Yes, we are fully licensed and insured. We take our work seriously, and we carry the proper coverage to protect your property and our crew. We have been in business since 2001, and we are not going anywhere. If you want to verify our credentials, just ask, and we will be happy to provide the information.
If you are tired of dealing with gate companies that don’t call back or try to sell you a new system every time, give us a call. We are the neighborly choice for our Gate Repair services in Tarzana. We answer our own phones, we show up when we say we will, and we stand behind our work with a written promise. Call (818) 514-7606 today to get your gate working properly again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana.