Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tarzana
Gate parts and welding in Tarzana usually means one of two things: a hinge post that finally gave out on a 40-year-old wrought-iron gate, or a motor bracket that heat-warped one too many summers and snapped. We handle both, and we do it in your driveway. Hal Gatewood has been fixing gates since 2001, and his crew knows Tarzana’s hillside lots, the Santa Ana wind damage, and the way 105°F days punish old steel. If your gate drags, sags, or won’t hold a weld, call (818) 514-7606 and a live person picks up, any hour.
Why Gatewood Fence & Gate Is Tarzana’s Preferred Gate Parts & Welding Company
The difference between us and the company that quoted you one price on the phone and another at the door is simple: Hal’s name is on the shop, the address is published, and the license number is real. We don’t hide behind a call center. We don’t “dispatch” anyone. The person who answers the phone is the person who stands behind the work, and that’s been true since 2001.
Tarzana homeowners tend to call us after someone else already took a crack at it. We show up, find the hinge post was never set deep enough, or the weld was ground pretty but has no penetration, and we fix it properly. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no fine print. We also answer around the clock, which matters when your gate fails open at 2 a.m. and your driveway is wide open to the street.
Our Gate Parts & Welding team serves all of Tarzana, from the post-war tract homes north of the Boulevard down to the hillside estates south of it. We know the neighborhoods, the grade changes, and the old operators still running on borrowed time.
Our Gate Parts & Welding Services in Tarzana
Hinge Replacement
Most Tarzana gate failures start at the hinge. On the 1970s and 80s wrought-iron swing gates south of Ventura Boulevard, we regularly see hinge bolts that have wallowed out their holes after decades of thermal expansion and contraction. A gate that weighs 400 pounds leaning on a loose hinge destroys itself fast. In Tarzana, hinge replacement on a standard single swing gate typically runs $180 to $340, including realignment and greasing. If the post itself is cracked or rusted through at the footing, hinge work alone won’t save it, and we’ll tell you that before we touch anything.
Post Replacement
This is the big one on sloped Tarzana lots. Here’s what we see: the original concrete post looked fine above ground, but water pooled at the base for 30 years and the steel rotted inside the footing. The gate sags, the hinges pull out, and someone tightens the bolts hoping that fixes it. It doesn’t. Post replacement in Tarzana generally runs $450 to $900 per post, depending on depth, concrete work, and whether we’re matching ornamental stone or stucco. We dig, pour, set, and re-hang the gate the same day in most cases, because leaving a gate off its hinges overnight is a security problem you shouldn’t have to think about.
Rail Repair
Cantilever slide gates are common on wider Tarzana driveways, especially in the hillside sections where a swing gate would hit the grade. The weak point is always the bottom rail and the rollers. After years of dust and heat, roller bearings wear flat, and the gate starts grinding instead of gliding. Rail repair and roller replacement in Tarzana runs $220 to $480 typically, and we stock, so most jobs are done in one visit. If the rail itself is bowed or cracked, we’ll quote the weld repair before we start, not after.
Custom Welding
This is where Tarzana’s terrain matters most. When a flat-swinging gate drags because the driveway drops 12 inches across the opening, you can’t just bolt on a bigger hinge. The gate itself needs a raked bottom edge fabricated, or the whole setup needs to convert to a V-track cantilever slide. Tarzana custom welding jobs run $350 to $1,400 depending on the scope: small bracket repairs on the low end, full gate modification or heavy fabrication on the high end. We weld on site in your driveway, so the gate never leaves your property. You watch the work happen. Hal’s welding is the thing that sets us apart, and he has been doing it since 2001.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
We service and stock parts for the operators Tarzana homes actually have: DoorKing, Elite, Mighty Mule, and LiftMaster chief among them. The hillside estates south of Ventura Boulevard are full of early LiftMaster and Viking units from the 1980s that are well past their service life, and we keep the common brackets, boards, and safety-edge parts on hand so we aren’t telling you “part’s on order, see you in two weeks.” Tarzana heat eats motor mounting brackets, and the bracket for a 1985 LiftMaster isn’t something you find at the hardware store. We know what fits, we know what doesn’t, and we won’t sell you a whole new operator when a $40 bracket and a good weld fix the problem.
Common Gate Parts & Welding Problems We See in Tarzana Homes
- Grade drag on south-of-the-boulevard hillside driveways. When a driveway rises 8-15 inches across a gate opening, a standard flat gate rides up on the uphill side and drags. Tarzana techs solve this with raked gate fabrication or a cantilever slide, and this simply isn’t an issue on the flat lots a few miles north in Reseda. The fix is structural, not a hinge adjustment.
- Rusted hinge posts on 1970s era iron gates.The anchor plates and post footings weren’t designed for 50 years of Southern California heat cycling paired with pool-water overspray and irrigation runoff. We see rusted-through posts on estates off Reseda Boulevard and Tarzana’s hillside loops more than anywhere else in the Valley.
- Warped motor mounting brackets from repeated 105°F days.Tarzana routinely hits some of the highest ambient temperatures in Los Angeles County. Steel expands. Brackets flex. Old LiftMaster and Viking operators twist until the chain walks off the sprocket or the limit switch stops reading correctly.
- Santa Ana wind damage to light aluminum frames and roll-pin hinges.Fall and winter wind events funnel through the Valley hard enough to bend aluminum gate frames and shear roll pins. We see a predictable spike in Tarzana service calls every Santa Ana season, almost always the week after the first big blow.
Pricing for Gate Parts & Welding in Tarzana, CA
These are the ranges we quote in Tarzana day in and day out:
| Job | Typical Tarzana Range |
|---|---|
| Hinge replacement (single swing gate) | $180 - $340 |
| Post replacement (one post, set and re-hung) | $450 - $900 |
| Gate roller and rail repair (slide gate) | $220 - $480 |
| Custom welding (brackets, raked edges, fabrications) | $350 - $1,400 |
| Solar gate opener installation (hillside/long driveway) | $1,800 - $3,600 installed |
You’ll notice we give you the price before the work starts, and the price doesn’t change when the job’s done unless we found something new and you approved it. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate. Seniors and veterans get 10% off permanently. Call (818) 514-7606 and we’ll give you a real number over the phone.
We Also Serve Cities Near Tarzana
We run jobs across the West Valley every week, so if you’re in Encino, Reseda, Canoga Park, or Sherman Oaks, you’re in the regular service area. Some of those flatter lots have exactly the opposite problem Tarzana does, and we adjust for it. The team at Gate Parts & Welding in Tarzana works the whole corridor, but the hillside work is where we earn our keep.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tarzana
Because the problem isn’t the hinges. When a Tarzana driveway drops 8 to 15 inches across the gate opening, a standard flat gate physically cannot clear the uphill side. You need the gate bottom raked (cut and re-welded to follow the grade) or the whole gate converted to a V-track cantilever slide. In flat neighborhoods like Reseda this never comes up. In Tarzana hillside sections it’s the most common complaint we hear. Call (818) 514-7606 and we’ll come look at the actual grade and tell you which fix applies.
Most quality operators last 12 to 18 years in good conditions, but Tarzana’s repeated 105°F days cut that to 8 to 12 years. The heat expands motor brackets, cooks circuit boards, and degrades plastic gears faster. The early LiftMaster and Viking units installed in the 1980s are now well past anything reasonable and should be replaced rather than nursed. We’ll tell you honestly if your unit is at end of life, and we won’t sell you an operator you don’t need.
Yes. We install solar gate openers for Tarzana driveways where running mains power isn’t practical. A direct-burial electrical line down a 300-foot hillside driveway gets expensive fast, and solar systems are purpose-built for that. On a hillside estate off Reseda Boulevard we swapped an old LiftMaster operator for a solar unit with keypad entry because running power down the long drive wasn’t worth the trenching. Typical solar operator installation in Tarzana runs $1,800 to $3,600, and we quote it before any digging starts.
Most bent aluminum frames can be straightened and reinforced, but it depends on the alloy and where the bend is. Lightweight aluminum gates bend at the frame rails and sometimes at the roll-pin hinges, shearing the pin entirely. We can torch-straighten and weld gusset plates in place for roughly $250 to $600 in most Tarzana cases. If the frame is severely twisted or the welds have cracked across the pickets, replacement is the better call. Let us look first; we lean toward repair, not upsell.
In California, any new operator installation must comply with UL 325 safety standards, which means photocells or another listed entrapment protection device are mandatory. If you have a pre-1993 operator with no safety edges, it’s beyond its service life, and replacing it with a current compliant unit is the responsible move. We installed keypad entry and safety edges on the solar unit we put in off Reseda Boulevard, and the cost is included in the install quote, not added on after. Call (818) 514-7606 for a precise number on your gate.
Contact Gatewood Fence & Gate in Tarzana
If your gate drags on the uphill side, the post is leaning, or the operator sounds like it’s struggling, call us. You’ll reach a live person, any hour. We’ll schedule a time that works for you, show up when we say we will, and give you a price before we start. The quote you get is the price you pay. Call (818) 514-7606 for a free estimate in Tarzana.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana and the West San Fernando Valley since 2001.