Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills runs $3,800 to $18,500 for most residential estates, depending on swing versus slide, custom fabrication, operator class, and whether the system needs to integrate with Crestron, Savant, or a commercial intercom. We’re typically on site in Beverly Hills within 24 hours for quotes and can schedule most installations within two to four weeks. Hal Gatewood has been the owner and the name on the invoice since 2001, and he still walks every Beverly Hills job himself. Call (818) 514-7606 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Installation Company
Beverly Hills is not like the rest of Los Angeles. It has its own Building & Safety department, its own inspectors, and its own rules for where a gate operator can sit, how far it must be set back, and what sight lines must be preserved. Most contractors don’t realize this. We do, because we work here constantly, and we know the difference between a Beverly Hills permit and an LA city permit. That matters when an inspector drives up to a hillside estate off Mulholland and starts measuring.
Reputation in this city runs on word of mouth between estate managers, security directors, and the homeowners who compare notes at the Hillcrest Country Club. Hal’s name is on the shop, his address is published, and his license number is easy to look up. That’s the oldest accountability there is. When a Beverly Hills customer calls us about a gate another company botched, we send Hal or one of his crew, not a salesperson with a tablet. The name is on the shop, and the shop is down the road.
We answer the phone with a live person 24/7. No voicemail, no call center, no chatbot that asks you to describe your gate problem to a machine. You call, a human picks up, and that human knows gates. If your estate manager needs us to coordinate with a security firm before we even set foot on the property, we handle that too. We’ve done it hundreds of times.
Our Gate Installation Services in Beverly Hills
Driveway Gate Installation
Driveway gates in Beverly Hills are rarely simple. They’re custom welded, ornamental, heavy, and often automated with operators that must hold up to Santa Ana wind loads and daily use by staff, vendors, and family. We fabricate on site when needed, weld in the driveway rather than hauling your gate to a shop, and spec operators rated for the actual weight and duty cycle of your gate, not what was on sale at a big-box store. A gate sags in the hinge post, not in the middle, and that is where we start.
Pedestrian Gate Installation
Pedestrian gates on Beverly Hills properties tend to get more daily use than the driveway gate. Staff come and go, deliveries arrive, landscapers use the side entrance. That means hardware needs to be commercial grade even on a gate that looks residential. We install pedestrian gates with self-closing hinges, magnetic locks, and keypad or intercom entry matched to the estate’s existing access system. If the gate gets used 40 times a day, it needs hardware that can take that for years, not months.
Sliding Gate Installation
Sliding gates make sense on Beverly Hills properties where a swing gate would eat up too much driveway slope or block sight lines the Building & Safety inspectors will flag. We install cantilever and V-track sliding gates, spec the right motor for the gate’s weight, and handle the power run, loop detectors, photocells, and safety edges properly. A sliding gate that was never properly leveled will drag, bind, and kill its motor early. We level the track and set the gate square before the operator ever gets bolted on.
Swing Gate Installation
Swing gates are the classic Beverly Hills driveway entry, especially the dual-leaf ornamental iron gates on the flats south of Sunset and the mid-century modern estates up in Trousdale. These gates are heavy. A dual-leaf custom iron swing gate can easily weigh 800 pounds per leaf. The operator must be incline-rated if the driveway pitches upward, and the hinge geometry has to be custom for the post spacing and the gate’s droop characteristics. We install swing gates that run quietly and never bind, because we set the post, the hinge, and the operator as one system, not three separate guesses. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We’re certified to service and install nine major gate brands, including DoorKing, Elite, Mighty Mule, and LiftMaster. For Beverly Hills estates, LiftMaster incline-rated operators and Elite commercial swing operators are the most common spec we recommend, depending on gate weight and slope. We stock common parts locally so we’re not waiting on a distributor in another county when your gate is down. And if your estate runs a Crestron or Savant system, we coordinate the gate operator’s relay and sensor integration with your automation integrator or security director so the gate, intercom, and cameras all talk to each other.
Common Gate Installation Problems We See in Beverly Hills Homes
- Undersized operators on heavy gates. A contractor quotes a residential-grade operator on a 900-pound custom iron gate because it was cheaper. The first Santa Ana wind event bends the arm and strips the drive gear. We see this constantly north of Sunset.
- Wrong permit pulled. A contractor pulls an LA city permit because they don’t know Beverly Hills is its own municipality. The job fails inspection, the homeowner waits another month, and the contractor disappears. We pull the right permit from day one.
- Corroded low-voltage connections. The marine layer that settles over the hills at night corrodes terminal connections on intercoms and keypads faster than the drier flats do. A gate that works fine at noon dead-shorts at 6 a.m. We use sealed connectors and weather-rated enclosures on every Beverly Hills install.
- Haste on hinge geometry. A gate hung too quickly drifts, sags, and grinds the operator to death in 18 months. Show me the gate closing on its own and I’ll show you where it’s failing. We take the time to set hinge posts in concrete properly, square the leaves, and stress-test the full swing before the operator is ever powered on.
Pricing for Gate Installation in Beverly Hills, CA
These are real ranges for the Beverly Hills market, not national averages. A single swing gate with a standard operator typically runs $3,800 to $7,500. A dual-leaf custom ornamental swing gate with an incline-rated operator on a hillside estate runs $7,500 to $14,000. A sliding gate runs $6,000 to $12,000 depending on track style and gate weight. Full systems with intercom, camera, keypad, and Crestron or Savant integration add $2,500 to $8,000 depending on scope. Every quote is written, itemized, and agreed before any work starts. No one shows up and adds a surprise line item at the door. The price we quote is the price you pay, and every job carries the 90-Day Done Right Promise in writing. Call (818) 514-7606 for a free estimate.
We Also Serve Cities Near Beverly Hills
We work throughout the Westside and the Valley, including West Hollywood, Sherman Oaks, Santa Monica, and North Hollywood. If you’re in one of those areas and want the same Gate Installation approach we bring to Beverly Hills, call the shop. And if you’re comparing contractors across the region, our Gate Installation in Beverly Hills page goes deeper on what makes this city different.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Yes. Beverly Hills Building & Safety issues its own permits for gate operator installations, with setback and sight-line rules that are different from the surrounding City of Los Angeles. A contractor who pulls an LA city permit instead of a Beverly Hills permit will fail inspection. We handle the permit application as part of the installation and make sure the plan meets Beverly Hills code before anything gets welded. Call (818) 514-7606 and we’ll walk you through the permitting process before you commit to anything.
Yes. We regularly integrate gate operators, intercoms, and keypads with Crestron and Savant systems on Beverly Hills estates. The mechanical gate work is ours; the smart-home integration is coordinated with your integrator or security director so the gate triggers the right camera, logs the right entry event, and opens for the right codes. We’ve done this on Trousdale Estates properties, on the flats, and everywhere in between. Call (818) 514-7606 for an exact quote, and tell us which system you run.
You need an incline-rated operator with enough torque to hold back a heavy gate on a slope, not a standard residential unit. On a recent Trousdale installation, we replaced a burned-out residential operator with a LiftMaster incline-rated unit and custom hinge geometry to hold the heavy ornamental panels square through Santa Ana wind season. We spec the operator for your driveway’s exact grade and gate weight, and we test it under load before final inspection. Call (818) 514-7606 and we’ll come measure the slope and the gate.
Because the operator was undersized for the gate, or the hinge geometry was never set correctly, or both. Santa Ana winds hit a heavy dual-leaf swing gate like a sail. If the operator can’t hold the gate at full throw, the arm bends and the gears strip in one night. We replace the operator with one rated for the actual wind load, rebuild the hinge points, and then the gate holds. Call (818) 514-7606 and we’ll come assess what failed, and what needs to change so it doesn’t fail again.
You set the hinge geometry right the first time, spec the correct operator, use sealed low-voltage connections, and lubricate the right points on schedule. Most noisy gates are suffering from worn hinges or a gate that was never hung square. We square the gate, align the hinges, match the operator to the actual weight, and then stand behind it with our 90-Day Done Right Promise. If something isn’t right, one call brings Hal back. Call (818) 514-7606 and we’ll come have a look at your gate.
Call Gatewood Fence & Gate for Gate Installation in Beverly Hills
If you need a gate installed in Beverly Hills and you want it done by people who know this city’s permit rules, hillside conditions, and the way estate managers expect things to work, call us. Hal Gatewood has been at this since 2001, his name is on the shop, and he’ll be the one you see again at the hardware store. The price is written before work starts, every job carries the 90-Day Done Right Promise, and there’s no trip charge inside the county. A live person answers at (818) 514-7606, 24 hours a day, every day. Call now for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.