Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
How Much Does Gate Motor & Opener Cost in Tarzana?
For most residential Gate Motor & Opener services in Tarzana, you should expect to pay between $150 and $450, while a full replacement of a gate opener system typically ranges from $1,200 to $2,800 depending on the brand, the weight of your gate, and the existing electrical setup. These prices cover labor and parts, and at Gatewood Fence & Gate, we provide upfront pricing so you know the cost before we turn a single wrench.
When your gate stops working, it is more than just a minor inconvenience, it is a security risk for your home. I am Hal Gatewood, and I have been fixing gates since 2001. I have seen every type of motor failure in this valley, from simple sensor misalignments caused by dust to burnt-out circuit boards caused by our intense summer heat. If you need help with your Gate Motor & Opener in Tarzana, call us at (818) 514-7606. We answer our own phones, and we will be happy to give you an honest estimate.
Gate Motor & Opener Cost Breakdown (2026)
The cost of your gate project depends on whether we are repairing a specific component or installing an entirely new unit. Because we specialize in repairing what others want to replace, we often find that a $200 repair saves you from a $2,000 replacement. Below is a breakdown of typical costs for the Tarzana market.
| Service Type | Estimated Cost Range |
|---|---|
| Basic Troubleshooting & Sensor Alignment | $125 - $225 |
| Circuit Board or Logic Board Replacement | $350 - $750 |
| Drive Chain or Belt Replacement | $250 - $450 |
| Gate Motor Capacitor Replacement | $180 - $300 |
| New Gate Motor Installation (Standard Residential) | $1,200 - $2,800 |
| Access Control Keypad or Remote Programming | $150 - $300 |
These numbers represent the current market in Tarzana. When you call us for an estimate, we look at the specific gate hardware you have in place. If your motor is failing because the gate itself is dragging on the concrete, fixing the motor without addressing the gate’s alignment is a waste of your money. That is why we look at the whole system, not just the box on the wall.
What Affects Gate Motor & Opener Pricing in Tarzana
Pricing isn’t just about the motor itself. It is about how the motor interacts with your specific property. Here are the main factors that influence the final price of our work.
- Gate Weight and Size: A heavy, wrought-iron gate requires a much stronger motor than a lightweight aluminum or vinyl gate. If the motor is undersized for the gate, it will burn out prematurely, which is a common issue I see when cheap, big-box-store openers are installed by non-professionals.
- Power and Voltage Requirements: Most residential gates run on standard 110V power, but if we need to run new electrical lines or install a step-down transformer for a low-voltage system, that adds labor time.
- Safety Compliance: Modern gates require specific safety loops, photo-eyes, and reversing edges to meet current safety standards. If your old system lacks these, we have to bring the system up to code, which is a non-negotiable step for your family’s safety.
- Brand Compatibility: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some brands have proprietary parts that are more expensive to source than others.
- Condition of the Gate Hardware: A gate that doesn’t swing or slide smoothly puts immense strain on the motor. We often have to perform on-site welding or hinge repair before the new motor can be installed properly.
We are locally owned and owner-operated, and we have been serving this community since 2001. We do not have a corporate office passing down price hikes to you. The price you are quoted is the price you pay, and we stand behind it with our 90-Day Done Right Promise.
The Real Cost of “Cheap” Repairs
I get calls every week from homeowners in Tarzana who hired the cheapest guy they could find, only to have the gate fail again a month later. They end up paying for the first repair, then paying me to fix it correctly. A gate sags in the hinge post, not in the middle, and that is where we start. If you do not address the root cause, you will just be fixing the same problem over and over again.
When you call Gatewood Fence & Gate at (818) 514-7606, you are getting a technician who knows that a gate is a mechanical system. We don’t swap parts just to see if it works. We diagnose the failure, explain why it happened, and fix it so it lasts. We have a published address, a state-licensed reputation, and a name that is on every invoice. We are not passing through town, and we aren’t a call center. You will see my face or one of my team members at your door, and we will treat your gate as if it were our own.
How to Save on Gate Motor & Opener Services
You don’t need to overpay to get a reliable, working gate. We believe in honest, upfront pricing, and we offer several ways to help you save on your home gate maintenance.
- Take Advantage of Our Standing Offers: We offer $40 off any repair over $200. It is a simple way to help with the costs of getting things back in working order.
- Senior and Veteran Discounts: We provide a permanent 10% discount for seniors and veterans. Just mention it when you call.
- Get a Second Opinion: If you have a written estimate from another company that seems high, call us. We offer free second opinions on any written estimate. If we can do it for less, or if we see that you don’t actually need all the work they suggested, we will tell you.
- No Trip Charge: We do not charge a trip fee for work inside the county. We are based here, and we serve this area, so we don’t think you should pay for us to drive to your neighborhood.
If your gate is making a grinding noise, moving slower than usual, or stopping halfway through its cycle, call us. Often, these are signs of a simple adjustment or a failing capacitor that is much cheaper to fix now than after the motor burns out completely.
Safety First: Why You Should Not DIY
I know there are plenty of videos online showing you how to fix your own gate motor. Please, listen to me: modern gate openers involve high-voltage electricity and, in many cases, high-tension springs or heavy, moving parts that can cause serious injury. If you are not a trained professional, do not attempt to open the motor housing or mess with the wiring.
The capacitors inside these units can hold a dangerous electrical charge even after you pull the plug. The drive chains and arms can crush fingers or pinch skin instantly. We are licensed and insured for a reason. When you call us, you are paying for our expertise and our safety equipment, but you are also paying for the peace of mind that the job will be done safely. If you have a problem with your gate, call (818) 514-7606 and let us handle the dangerous work.
The Gatewood Fence & Gate Difference
We are not a franchise. We are a locally owned, owner-operated business that has been around since 2001. When you search for help with your gate, you see a lot of national companies that route your call through a dispatch center in another state. They send a stranger to your house who may not have the parts or the experience to fix your specific brand of gate.
That is not how we operate. We have a shop, we have a name, and we have a reputation in Tarzana that we have built over 29 years. When you call us, you are speaking to a real person, 24 hours a day, 7 days a week. If you have an emergency at 2:00 AM, you get a person, not a voicemail. If we say we will be there, we will be there.
We also specialize in on-site welding. Many companies will tell you that you need to replace a gate panel or a post because they don’t have the equipment to fix it on the spot. We bring the welder to your driveway. We fix the steel, we reinforce the hinges, and we get the motor running again without hauling your gate off to a warehouse for weeks. This is the oldest form of accountability there is: we fix it, we test it, and we leave it working right in your driveway.
Understanding Your Gate’s Electronic “Brain”
Modern gate openers are sophisticated machines. They use logic boards to control speed, soft start and stop, and safety sensors. In Tarzana, our biggest enemy is the heat. High temperatures can cause the delicate electronics on the logic board to fail over time, or they can dry out the lubricant in the motor gears, making the motor work harder than it should.
When we come out to look at your gate, we don’t just look at the motor. We check the entire system. We test the photo-eyes to make sure they aren’t blocked by debris or failing due to sun damage. We check the resistance of the gate to ensure the motor isn’t straining to move it. We check the limit switches to ensure the gate stops exactly where it should. A well-maintained gate should last for many years, but it requires regular attention to the small things.
If you have a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system, we have the parts and the experience to service it correctly. We don’t guess. We know these brands inside and out.
FAQs - Gate Motor & Opener Cost
How much does it cost to fix a gate that won’t open in Tarzana?
Most gate repairs in Tarzana range from $150 to $450, depending on whether the issue is a simple sensor misalignment, a bad capacitor, or a more complex logic board failure. Call (818) 514-7606 for an exact quote, and remember that we offer free estimates.
Is it cheaper to repair my gate motor or replace it?
In most cases, it is significantly cheaper to repair a motor than to replace it, provided the internal gears aren’t stripped and the housing is in good shape. We always look to repair first, and we will only recommend a replacement if it is genuinely the most cost-effective option for you in the long run.
Can you fix my gate on the same day I call?
We prioritize urgent repairs because we know a broken gate is a security issue for your home in Tarzana. We answer our phones 24/7, so call (818) 514-7606, and we will do our best to get a technician to your property as quickly as possible.
Do you charge for estimates?
We provide free estimates for all gate work. We believe you should know exactly what the job costs before we start, with no hidden fees or surprise charges at the door.
What if I have an older gate opener that is no longer made?
Because we have been in business since 2001, we have a deep inventory of parts and the ability to source replacements for many older systems that other companies might refuse to touch. If it can be fixed, we will fix it, and if it truly cannot be saved, we will tell you honestly and help you choose a modern, reliable replacement.
Ready to Get Your Gate Working Again?
Your gate is the first thing you see when you come home, and it is the first line of defense for your property. If it isn’t working, it is a problem that needs a real solution, not a temporary patch. We are here to help you get it done right, the first time. We are Hal Gatewood and the team at Gatewood Fence & Gate, and we have been serving Tarzana for over 29 years. We are licensed, insured, and ready to help.
Call (818) 514-7606 today to speak with a real person, not a bot or a call center. Let’s get your gate moving again.
Pricing reflects the Tarzana market as of 2026. Gatewood Fence & Gate offers free estimates - call (818) 514-7606.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana since 2001.
What Our Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg





Before
After
Before
After
Before
After