Linear Gate Installation Nationwide | Gatewood Fence & Gate

Linear Gate Installation in Tarzana: What to Know First

We install and service Linear gate operators on driveways and pedestrian gates throughout Tarzana, and most jobs are quoted within a day or two of your call. As an independent Linear service provider, we’re not tied to any manufacturer’s playbook, which means we install what actually works for your gate’s weight, swing, and location rather than whatever ships in a stock kit. A typical Linear gate installation in Tarzana runs from around $850 for a basic single-swing opener up to $2,400 or more for a heavy sliding gate with new hardware, and every price is agreed before we touch a tool. Call (818) 514-7606 and Hal will talk you through what you’ve got and what it’ll take.

Call (818) 514-7606

This page is for Tarzana homeowners who own a Linear product, are thinking about buying one, or inherited one with the house. If you’re staring at a dead keypad or a gate that groans halfway across the track, you’re in the right place.

How Linear Products Fail - and How We Fix Them

Linear makes solid equipment, but every brand has its patterns. Here’s what we see on the driveways and walkways around Tarzana, and what we do about it.

• Linear LRA actuator limit switches drifting out of adjustment. The LRA series swing-arm operators use mechanical limit switches that can slip over time, especially on gates that catch afternoon sun against a south-facing wall. The gate stops short or over-travels past the closed position. We open the actuator, re-set the limits, and torque them properly. If the switch itself is worn, we replace it with the Linear OEM part rather than a generic microswitch that’ll drift again in six months.
• APeX control board relays failing after power surges. Tarzana gets its share of transformer blowouts during Santa Ana season, and the Linear APeX board’s onboard relays are often the first casualty. The symptom is a board that clicks but won’t send voltage to the motor. We test for that first before condemning the board, because the surge can also take out the transformer. Fix is typically a new transformer, a relay repair, or a board replacement, depending on what the meter says.
• MegaCode receivers losing programming after infrequent use. The Linear MegaCode receivers on older swing gates sometimes drop their stored remote codes when the gate sits unused for weeks at a time, which happens on second homes and rental properties in Tarzana. Our fix is reprogramming and, if it happens twice, we install a small battery backup to keep the receiver’s memory alive through power blips.
• Undersized operators on gates Linear never intended to move. We regularly see an LS050-spec Linear operator bolted to a 16-foot solid wood driveway gate that weighs twice what the operator was rated for. The motor burns out, the gear strips, and the whole assembly gets replaced. When we install, we weigh the gate and match the operator spec to the real load, not the sticker on the original box.
• Photo-eye misalignment from shifting concrete. Tarzana’s clay soil expands and contracts with the seasons, and gate posts on concrete pads can shift enough to throw the safety photo-eyes out of line. The gate reverses halfway or refuses to close. We re-bed the post if it moved, then re-aim the eyes and hardwire the connections so they don’t vibrate loose again.

Our Linear Gate Installation Process

Every job starts the same way: we look at the whole gate, not just the part that failed. Here’s how a typical Linear installation goes from first call to final walkthrough.

1. 1
   The call. You reach a live person, day or night. We ask what the gate is doing, what brand the operator is, and roughly how old the gate is. No script, no four-hour window.
2. 2
   The on-site look. We come out, take measurements, weigh the gate by hand-testing its swing, and check the condition of the hinges, posts, and track if it’s a slider. The problem is often older than the operator itself.
3. 3
   The straight answer. We tell you what’s actually wrong and what it costs to fix. If the gate frame is salvageable and the motor is the only dead part, we say so. Hal’s been known to talk a customer out of a new operator when a $30 limit switch will do it.
4. 4
   The parts call. For Linear equipment, we use OEM parts when the job calls for it, generally on boards and safety circuits. For brackets, chains, and general hardware, we’ll use quality aftermarket when it saves you money without costing you lifespan.
5. 5
   The install. We mount, wire, set limits, program remotes and keypad, test the safety reverse, and run the gate through 15 or 20 full cycles before we call it done.
6. 6
   The walkthrough and the promise. We show you what we did, hand you the remotes, and put the 90-Day Done Right Promise in writing on the invoice. If it’s not done right, one call brings Hal back. No runaround.

What Linear Gate Installation Costs in Tarzana

Here’s what we charge for common Linear scenarios on Tarzana driveways. These are real numbers from real jobs, not internet guesses.

• New Linear LRA single-swing installation (gate up to 12 feet, standard hardware): $850 to $1,200
• Linear APeX control board replacement, installed: $380 to $560
• Linear MegaCode receiver with two remotes, programmed: $220 to $310
• Full sliding gate operator replacement with new track and hardware: $1,600 to $2,400
• Photo-eye replacement and realignment: $120 to $180
• Keypad add-on, installed and programmed: $180 to $260

What moves the price is gate weight, post condition, and whether the wiring from your house to the gate needs to be trenched and redone. We quote the total before work starts, and that’s the number on the invoice. Estimates are free, and if you’ve got a written estimate from another company, we’ll give you a second opinion on it at no charge. Call (818) 514-7606 for a real number on your exact gate.

Why Tarzana Homeowners Call Gatewood Fence & Gate for Linear Work

We’ve been working on gates in Tarzana since 2001, and the name on the shop is the same name that answers the phone. Hal Gatewood picked up welding and metal fabrication at Los Angeles Pierce College over in Woodland Hills before he ever touched a gate motor, and that’s why we fix the gate in your driveway instead of hauling it off to a shop across town. Every job carries the 90-Day Done Right Promise in writing, and we’ve never asked a customer to read the fine print to find out what that means. When a Linear operator needs parts, we know which ones to order and which ones to skip. And if your situation calls for a different brand, we service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing too, so you get a straight recommendation instead of a brand cheerleader.

FAQs