Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Van Nuys
A new driveway gate in Van Nuys typically runs $2,800 to $7,500 installed, depending on whether you need a single swing, a sliding gate, or a full security package with an operator and access control. We install, program, and weld on site, and we’ll give you the price in writing before any work starts. Hal Gatewood has been building and installing gates in the San Fernando Valley since 2001, and if you live anywhere between Van Nuys Boulevard’s northern stretch and the 101, you’re in our service area every day of the week. Call (818) 514-7606 and you’ll get a live person, not a phone tree.
This page is for Van Nuys homeowners and property managers who want a gate installed right the first time, with materials and hardware specified for the Valley’s real conditions: heat that hits 110°F on a July afternoon, Santa Ana winds that slam gates off their hinges, and 40-year-old concrete pads that have settled unevenly. That’s what actually fails here, and that’s what we build around.
Why Gatewood Fence & Gate Is Van Nuys’s Preferred Gate Installation Company
Most gate companies in Van Nuys will sell you a beautiful gate and disappear when it sags, binds, or burns out its motor two summers later. We don’t build that way. Every installation starts with the post and the track, because in this neighborhood, a gate that works in April can stall in August when the steel expands in the afternoon heat. We gap the track for thermal movement, we weld on site so we’re not relying on someone else’s bracket, and we pressure-test the operator under the exact conditions Van Nuys throws at it.
Our Gate Installation team has been working the Valley’s inland heat pocket long enough to know which powder-coat formulations blister by year three and which ones hold. When you call us, the person who shows up is backed by a written 90-Day Done Right Promise. If it’s not right, one call brings us back, no runaround, no argument. The address is published, the license is verifiable, and Hal’s name is on every invoice. That matters in Van Nuys, where a lot of us have been burned by outfits that treat a gate like a drive-by transaction.
We answer the phone 24/7 with a live person. Not a voicemail box, not a call center. If your gate fails at 9 pm on a Sunday after a windstorm, you talk to a human who can actually get someone to Van Nuys that night.
Our Gate Installation Services in Van Nuys
Driveway Gate
Driveway gates in Van Nuys fall into two camps: single-family postwar tract homes near Van Nuys Boulevard and the gated apartment complexes scattered from Sherman Way down to Victory Boulevard. For a home, we install steel or wood swing gates with operators sized to the actual panel weight, not the marketing spec. For apartments, we focus on safety-compliant operators, magnetic locks, and intercom retrofits that won’t leave tenants stranded at the call box. A standard single driveway gate with automation starts around $3,200 in Van Nuys.
Pedestrian Gate
A pedestrian gate next to the driveway sounds simple until it sags and the latch stops lining up. In Van Nuys, the two things we see destroy pedestrian gates are Santa Ana wind gusts that yank them open and pressure-treated wooden frames that warp in the sustained heat. We set pedestrian gate posts below existing concrete settling depth and use wind-rated hinges that hold the gate square through an October windstorm. Expect to spend $1,200 to $2,400 for a quality pedestrian gate installed.
Sliding Gate
Sliding gates are the most common driveway gate in Van Nuys, and they’re also the one the Valley heat punishes hardest. A steel track in direct sun will expand enough by 2 pm to bind a gate that rolled fine at 7 am. We install sliding gates with an expansion gap calculated for Van Nuys’s 105°F+ afternoons, and we use heavier track than the coastal standard. A manual sliding gate runs $2,800 to $4,500. Adding an operator brings it to $4,500 to $7,000, depending on the motor class.
Swing Gate
Swing gates have their own Van Nuys failure pattern: Santa Ana winds. Gusts that funnel through the Valley bend lightweight aluminum panels off the hinges or strip the hinge welds entirely. We build swing gates for wind load, with heavier posts, gusseted hinge plates, and operators that have a hard-stop clutch so the wind doesn’t tear the motor apart. A single swing gate with automation in Van Nuys typically runs $3,000 to $5,500; a double swing runs $4,500 to $8,000, depending on width and panel weight.
Security Gate
Along Van Nuys Boulevard and Sepulveda Boulevard, security gate means something different than it does in Sherman Oaks. Tow yards, body shops, and industrial lots cycle their gates dozens of times a day on asphalt that radiates 130°F heat back at the operator. A residential-grade motor lasts two years there. We install commercial-class operators with fan-cooled motors, stainless steel rack and pinion, and cycle counts rated for the real usage. Security gate installations on these corridors start around $6,000 and go up based on gate size and access control requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
We stock parts and install operators from DoorKing, LiftMaster, Elite, and the other major brands Van Nuys properties already use. If you have an existing DoorKing or LiftMaster controller and just need the gate itself, we’ll match the hardware so your intercom, keypad, and remote setup keep working. That matters in a neighborhood full of 1980s apartment complexes with aging access systems: the gate and the operator have to talk to each other. Our shop keeps common boards, safety edges, and remotes on hand so a repair or retrofit doesn’t wait a week on a parts truck from out of state.
Common Gate Installation Problems We See in Van Nuys Homes
- Thermal track bind on sliding gates: The steel track expands in 105°F heat and the gate stalls or derails right at peak afternoon hours. We install expansion-gapped tracks so the gate rolls through a Valley heat wave instead of seizing in it.
- UV-baked powder coat and warped wood: Sustained 100°F+ days blister cheap powder-coat finishes and twist pressure-treated wood frames. In Van Nuys, we spec finishes and wood treatments rated for inland heat, not coastal mildness.
- Santa Ana wind damage to swing gates: October and November gusts bend aluminum panels off their hinges and strip welds. We install wind-rated hinges, heavier posts, and operators with hard-stop clutches so a windstorm doesn’t leave your gate hanging.
- Premature operator burnout on commercial corridors: Gate motors on Van Nuys Boulevard and Sepulveda Boulevard die in two to three years because of radiant asphalt heat and high daily cycle counts. We install commercial-class BFT and DoorKing operators built for exactly this duty cycle.
Pricing for Gate Installation in Van Nuys, CA
| Gate Type | Typical Van Nuys Price Range |
|---|---|
| Pedestrian gate | $1,200 - $2,400 |
| Single swing driveway gate (automated) | $3,000 - $5,500 |
| Double swing driveway gate (automated) | $4,500 - $8,000 |
| Sliding gate (manual) | $2,800 - $4,500 |
| Sliding gate (automated) | $4,500 - $7,000 |
| Commercial security gate (sliding, automated) | $6,000 - $12,000+ |
What changes the price in Van Nuys is the existing concrete. Postwar tract home pads have settled, and 1970s apartment complex pours have spalled after 45 summers. If we have to cut and repour a section of pad so the track sits level, that’s part of the written estimate, not a surprise line item. Every job gets the price in writing before we start, and estimates are free. If you’re comparing quotes, we’ll also give you a free second opinion on any written estimate from another company. Call (818) 514-7606 and we’ll walk through your gate, your opening width, and your access control needs, then hand you a number that won’t change at the door.
We Also Serve Cities Near Van Nuys
Our crew covers Van Nuys every day and the surrounding Valley communities regularly as well. If you’re in Sherman Oaks, North Hollywood, Encino, or Reseda, give us a call at (818) 514-7606 and we’ll see if we can work you into this week’s schedule. Same live person answers, same 90-Day Done Right Promise, same upfront pricing.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Van Nuys
The steel track expands in the heat. On a 105°F Van Nuys afternoon, the track and the gate grow just enough to close the clearance gap, and the gate locks up. We fix this by cutting an expansion gap into the track and checking the gate’s alignment at the hottest part of the day, then rebalancing the operator’s force settings. Call (818) 514-7606 and we’ll send someone out before the next heat wave.
Because the asphalt radiates heat back at the motor all day and the gate cycles dozens of times an hour. That duty cycle kills residential-class motors fast. Along Van Nuys Boulevard, our crew replaced a burned-out LiftMaster slide gate operator at an auto-body shop for exactly this reason. We installed a BFT commercial operator with a fan-cooled motor and stainless steel rack and pinion, then adjusted the track gap for thermal expansion so the gate won’t bind on 105°F afternoons. If your commercial gate is eating motors, call us for a cycle count and a motor spec that actually fits the lot.
Yes, and we see it every fall. Santa Ana wind gusts come down through the Valley hard enough to bend lightweight aluminum swing gates off their hinges or strip the hinge welds. We install swing gates with wind-rated hinges, heavier posts, and operators with hard-stop clutches specifically because Van Nuys catches these winds every October and November. If yours already got bent, we can often straighten and reinforce it rather than replacing the whole panel, and if it’s beyond saving, we’ll tell you that too. Call (818) 514-7606 for a straight answer.
Only if you get the right powder. Cheap powder-coat blisters under sustained 100°F+ Valley sun within two or three summers. We spec heat-rated powder-coat formulations and match the finish to the gate’s sun exposure, so a south-facing Van Nuys Boulevard gate doesn’t look like cottage cheese by July. It’s a difference in material cost, not a marketing gimmick, and it’s the difference between a finish that lasts a decade and one that peels in three years.
Every automated gate in Van Nuys needs entrapment protection that meets current UL 325 safety standards: photoelectric sensors across the gate opening, a reversing mechanism on the operator, and for most residential installations, a monitored safety edge. We install the full package on every automated gate we put in, no exceptions, and we program and test it against all the required safety scenarios before we hand you the remote. Call (818) 514-7606 and we’ll spec it all out in the written estimate, not as a bolt-on afterthought.
Contact Gatewood Fence & Gate for Gate Installation in Van Nuys
If you’re ready to stop fighting a gate that binds in the heat, bends in the wind, or burns out motors every two years, call (818) 514-7606. You’ll get Hal or someone on his crew, we’ll schedule a free measure and walk the site with you on the day we promise, and you’ll get a written price before any work starts. The name is on the shop, the license is verifiable, and we’ve been doing this in the Valley since 2001. If the gate’s not right when we’re done, the 90-Day Done Right Promise says we make it right. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys since 2001.